Dial gauge

Käfer 0,01 mm

Condition: new, 355 mm Gedpfx Afefg E Hzs Uobi 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. Gbodelf Tu Uspfx Af Uoi > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: ready for operation (used), Year of construction: 2007, A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible. Gbedjrdhh Sepfx Af Uoi

Year of construction: 2024, operating hours: 200 h, condition: new, functionality: fully functional, Dear Mr./Mrs., company Planit have opportunity to offer you new plasma nitriding equipment. Gsdpfx Afovfdv Ij Ujbi Equipment is new, our production, cold wall equipment, used in 10 batches just to be tested. Characteristics of equipment: - Dimension of equipment: 1400x800x2000 - Chamber dimension: D500x600 - Maximum dimension of work piece: D400x500 - Equipment has own lifting device - Dimension of electrical cabinet: 860x600x2000 - Power supply of equipment: 3x400V,50 Hz - Nominal power of equipment: 18 KW - Nominal power of plasma: 15KW, maximum current 38A, voltage 0-800 VDC - Pulse mode: 0-20kHz,unipolar,changable pulse and pause - Automatic control of arc - 3 gasses supply with MASS FLOW CONTROLLERS (technology of post oxidation) In addition to equipment, we also offer its installation, giving all technology (nitriding,post oxidation), technical documentation. Also, we are making equipment according to customer request.

Condition: used, power: 5.5 kW (7.48 HP), cutting height (max.): 500 mm, cutting width (max.): 780 mm, total height: 2,650 mm, total length: 1,550 mm, total width: 950 mm, overall weight: 750 kg, Equipment: motor brake, No. 04522 Bandsaw HEMA UH 800 Used Gjdsylpd Ijpfx Af Uobi Roller diameter 800 mm Cutting speed 1650 m/min Motor power 5.5 kW Automatic motor brake Saw blade length 5450 - 5600 mm Table size 1200 x 900 mm LW Cutting width with fence 780 mm Maximum cutting height 500 mm Table can be tilted on both sides -45° to +45° As good as new HEMA band guide rollers Including various saw blades Transport dimensions approx. 1550 x 950 x 2650 mm LWH Weight approx. 750 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 2006, A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. Gedperdhh Isfx Af Usbi

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for optimal smooth running and stability when working with unbalanced workpieces Headstock can be moved along the entire machine bed, rotatable by 360° with detents at 0, 30, 60, 90, 135, 180, and 270 degrees Variomatic speed control, infinitely adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Godpfx Aow A Rqfjf Uobi Integrated spindle indexing device 36 x 10° Spindle lock at the front of the headstock for easy changing of workholding fixtures Double wedge clamp for tool rest and extension arm, particularly slip-resistant and efficient Tailstock with robust trapezoidal thread, 108 mm quill travel with scale, 9 mm through hole

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement Gjdpfsx D Nrhex Af Uebi X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Additional Equipment Probes: 2 included This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: used, Year of construction: 2007, machine/vehicle number: 75388, Machine: Wenzel LH87 Serial number: 075388 Year of manufacture: 2007 X 800mm Y 1000mm Gbsdpfex Ey Daex Af Uoi Z 700mm Measuring head: SP80

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V 50Hz 1.1A 0.37kW Gedsn Nyt Hopfx Af Uobi Pneumatic connection values: Compressed air supply line min. 6 bar / max. 10 bar Performance data: Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm usable height in the unit 800 mm loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm empty weight approx. 1320 kg