Vertical Turret Lathe - Single Column

Jungenthal

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 1470 mm Lhodpfx Aaoztn U Tomjl turning height: 1325 mm ram stroke range: 750 mm adjustment of cross-rail: 850 mm max. workpiece weight: 12000 kg faceplate turning speed range: 4,5 - 224 U/min feed per revolution: 0,06 - 8 mm rapid speed: 1,8 m/min total power requirement: 50 kW weight of the machine ca.: 16 t Machine was modernized in 2008 with new electric 2-axes digital readout 5-station turret head autom. swivelling diverse toolholders *

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Lhodpfxjxga Tnj Aamsl

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See images Lhedpfx Ajzv E Dwoamol Shipping by freight forwarder or collection only after prior arrangement.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2693/4533, Technical data: IHF Jungenthal manipulator, handling device, lifting aid, lifting arm Model Vector 130 (130 kg payload) Manipulator available in quantities of 2!!! Lhjdpszv Et Eofx Aamsl Payload at full extension: 30 kg (dependent on equipment/configuration) Height: approx. 4.2 m Upper arm: approx. 3.2 m Reach: approx. 1.6 + 1.9 m = 3.5 m to the articulated arm (height 2.1 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 600 kg Mounting plate 75 x 75 cm Mounting/attachment equipment for tire handling (see pictures) Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by prior appointment.

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Lhjdpfx Aewl A H Deamsl Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Condition: good (used), Year of construction: 1972, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,600 mm, faceplate diameter: 1,400 mm, Retrofit: 2001 Siemens control system SINUMERIK 840D Faceplate diameter 1,400 mm Turning diameter 1,600 mm Turning height 1,000 mm Fully functional. Please refer to the photos for further information. A video of the machine in operation can be provided upon request. Lhedpfx Aaszvl R Remol Inspection appointments are possible by arrangement. The buyer must arrange the collection. Loading onto a truck/container provided by the buyer is included. Invoice with VAT shown. Since these are used machines/used accessories, we exclude any warranty or guarantee. The information is provided to the best of our knowledge, and we assume no liability. We reserve the right to make changes to technical data and to correct any errors in the description. The buyer has the right to inspect the goods for condition and functionality before concluding the contract. We exclude any warranty for obvious and hidden defects, as well as compensation for damages of any kind, including damages that did not occur to the delivered item itself.

Condition: ready for operation (used), A CNC vertical lathe Jungenthal is available. Gear stages: 2, max. speed: 160rpm, max. workpiece height: 800mm, chuck jaws: 6, faceplate diameter: 2000mm, motor power: 50kW, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Lhsdpfx Aszcyqgjamjl

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm Lhsdpeu Sblwefx Aamsl total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: used, Technical Data Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Max. turning height (cross rail support): 1250 mm Max. turning height (side support): 1160 mm Max. faceplate load: 12,000 kg Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional Lodpfjwyn Ntsx Aamohl

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 Ledpsyft Ahofx Aamohl The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Inspection is possible at any time by appointment.

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Lhjdst Hwt Sepfx Aamsl * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Lhjdpevi Hrysfx Aamel Good general condition .

Condition: used, Year of construction: 1963, faceplate diameter 1200 mm swing diameter 1500 mm turning height 1300 mm slide adjustment 800 mm side head - cross travel 550 mm Ledpfx Aaeyqvuwomohl digital readout Heidenhain Overhauled in 1996 Machine is cycle-controlled with Heidenhain Positip New control panel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle diameter: 100 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,120 rpm, total height: 3,000 mm, total length: 6,000 mm, total width: 3,000 mm, table length: 1,250 mm, table width: 1,250 mm, type of input current: three-phase, spindle stroke: 900 mm, overall weight: 14,000 kg, year of last overhaul: 1999, Machine in excellent condition, used only for small operations. Condition of the slides: very good. Ljdpfx Aaozunfbomohl Its green color is still the original. Functional and available quickly. Equipped with a Heidenhain visual display and measuring scale, on 4 axes: X/Y/Z/B. Tooling included with this machine: see the photos below. Great deal, priced below market value. Technical specifications: 🔹 Spindle Spindle diameter: 100 mm Spindle taper: ISO 50 Spindle travel (W-axis): 900 mm Rotation speed: 7.1 to 1,120 rpm Main motor power: 11 kW to 15 kW 🔹 Travels X-axis (Longitudinal): 1,600 mm Y-axis (Vertical): 1,120 mm Z-axis (Cross): 1,250 mm W-axis (Spindle travel): 900 mm 🔹 Rotary Table Table surface: 1,250 × 1,250 mm Maximum allowable load on the table: 3,000 kg (3 tons) Table rotation: 360° (manual or motorized) 🔹 Facing Head Facing head diameter: 600 mm Max. boring/facing diameter: 900 mm Facing head speed: 7.1 to 224 rpm Facing head slide travel: 210 mm 🔹 Dimensions and Weight Overall dimensions (L × W × H): ~ 6,000 × 3,000 × 3,000 mm Total machine weight: ~ 14,000 kg (14 tons)

Condition: used, faceplate diameter 1400 mm swing diameter 1600 mm turning height 1200 mm Lsdpeyuqdzofx Aamjhl turning speed range - milling 1 - 240 U/min Control Siemens SIN 820T ram head - cross travel 1000 mm total power requirement 55 kW A.T.C. 12 positions Tooling