Vertical Turret Lathe - Single Column

Jungenthal DK1400

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Gjdpfx Abeyft Ahogobn Inspection is possible at any time by appointment.

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Gjdpfxocblc Se Abgsbn space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition . Gjdpfxjvi Hryj Abgjbn

Condition: used, Year of construction: 1963, faceplate diameter 1200 mm swing diameter 1500 mm turning height 1300 mm slide adjustment 800 mm side head - cross travel 550 mm digital readout Heidenhain Overhauled in 1996 Machine is cycle-controlled with Heidenhain Positip New control panel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Gedpfxsyqvuwe Abgobn More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Gbedpfx Aevca Izebgen Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 Gedpfxobn Amfo Abgjbn T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Gbodpfx Abowdmy Sjgsn Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Largest milling diameter 120 mm Godpfx Askw T Rmjbgebn Smallest milling diameter 5 mm Smallest tooth pitch module 0,30 Largest tooth pitch 2 mm largest milling length 100 mm with all accessories

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Gbedpfeg Urz Hsx Abgon Each of our welding rotary tables is designed in-house and manufactured with high quality components. We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. The new generation APSI are already in stock.

Condition: good (used), Description: The machine is in good technical condition; testing is possible by prior agreement. Application: production of gears (spur gears, helical gears, shafts) CAPACITY Max. gear diameter: approx. 400 mm Gbodoy Amiqjpfx Abgon Max. module: typically 6–8 (sometimes up to 10 for newer versions) Max. gear width: approx. 275–400 mm SPINDLE AND TOOL Cutter speed: up to approx. 500 rpm Tool diameter: approx. 160–240 mm Motor power: approx. 15–17 kW TABLE Table diameter: approx. 380–400 mm Table bore: approx. 80 mm Load capacity: up to approx. 1000 kg DIMENSIONS AND WEIGHT Length: approx. 4680 mm Width: approx. 2395 mm Height: approx. 2515 mm Weight: approx. 5–6.5 t (standard version)