Hot water tank

Johann Albrecht (JBT)

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Bjdpsxwyzasfx Ahvjcw Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Material: Brewhouse from stainless steel Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Bedpfx Aoppucashvecw Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: used, Year of construction: 2019, Cylindroconical fermentation and storage tanks, standing on four feet, with a maximum operating pressure of 2.5 bar. The tanks are each equipped with frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap and temperature control. Additional title: vertical, coolable, stainless steel pressure tanks with temperature control Gross volume: 2500 l Operating pressure: 2,5 bar Operating temperature: 50 °C Height: 2800 mm Material: stainless steel 1.4301 (AISI 304) Position: standing on 4 feet Base construction: cylindroconical Features: cooling jackets, insulation (50 mm chloride-free PU foam) cleaning line, 2 outlet lines with manual valves, pressure gauge, bung apparatus, hose level indicator, temperature control, sampling tap Bedpfx Ajxf D Iajhvscw

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Bsdpfx Ahju Av H Djvjcw

Condition: used, STC Film Wrapping machine, Machine used for packing champignon. Bcodpjc Nlxrjfx Ahvew Capacity 40-80 pack/min.

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Bodpow H I Trofx Ahvscw Electrical connection: 230 V. Machine dimensions mm: 820 x 580 x h1200. Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Productivity with 8 blades: 100 fruits / 1 minute Hole diameter: 30 mm. Machine weight: 100 kg.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, For sale: 500L EasyBrau brewhouse (Model SCB500/2, built 2016) – premium-quality Italian-built commercial brewing system designed for consistent output, efficient CIP cleaning, and user-friendly operation. Suitable for brewing up to 10HL per day. Fully refurbished at EasyBrau factory, completed 03-2025. Steam condenser upgraded in 2025 (enhanced steam/fume extraction and ventilation). Brewhouse configuration (3-vessel system): Consists of three primary tanks linked by a dedicated hydraulic transfer system: - Mash / Kettle / Whirlpool Tun: Features steam heating, built-in agitator, top manway, and tangential whirlpool inlet for effective trub removal. - Lauter Tun: Optimized for efficient wort separation with a rotating rake system, top manway, and side door for CIP and spent grain removal. - Hot Water Tank: Positioned below the lauter tun for space-saving, recovery of hot water for subsequent brews and cleaning cycles. Bedpsx U Tf Aofx Ahvjcw Key systems & features: - Steam-heated brewhouse (rapid heating and stable boiling) - Integrated hydraulic transfer system for dense mash and wort transfer - PLC control panel with e-stop, pump/agitator controls, lighting, safety interlocks, and speed regulation - Connects to plate heat exchanger for rapid wort cooling pre-fermentation - Designed for CIP circulation cleaning (vessels, piping, heat exchanger) - CE-marked industrial equipment Included Extras: Ultrafilter 20” High Flow cartridge filter housing, high-capacity beverage/process filtration, low pressure loss, inline design for breweries, soft drinks, water, and hygienic processing. Includes 12 x Ultrafilter PF-UF High Flow Pleated Filter Cartridge 3µm. 8 x 500L Stainless Steel Fermentation Tanks – supplied as complete sets with all key fittings/accessories for professional fermentation. Ideal for small breweries, pilot facilities, or expanding cellar capacity. - 500L Fermenter (top TC cap) - Double jacket - Carbonation stone - Temperature gauge - Pressure/vacuum (spunding) valve (0.2–2.2 bar) - Sight glass - Glycol solenoid valve 2 x 10HL Fermentation Tanks: - Sight glass - Glycol solenoid valve Steam Generator – Ditta Arturo Mazzi & F. (Italy) – fully serviced 10-2025 Year: 2010 Model: AB Serial/Fabric No.: 4017 Volume: 53.2L Max. working pressure: 5.5 bar Steam temp: 163°C Steam output: 50 kg/h KegLand Cannular Fully Automatic – Single Lane Canning Line (KL25164): Compact, brewery-grade automatic canning line designed for fast, reliable double seaming with minimal operator intervention – ideal for taprooms, microbreweries, seasonal batches, or as a backup/machine for mobile canning. - Fully automatic fill and seam cycle - Fitted with B64 chuck for consistent seam integrity - Integrated flow meter for accurate filling - CO₂ purge inlet helps reduce dissolved oxygen - Sanitiser spray inlet - Automatic lid dispenser - Up to 700 cans/hour capacity If you have any questions, please do not hesitate to contact us. As the system remains installed, full demonstrations under operating conditions are possible.

Condition: used, Year of construction: 2001, Chamber pasteurizer, manufacturer: Rico, type: 4.5, for 4 Euro pallets 800x1200 mm in crosswise orientation—2 pallets side by side and 2 rows one behind the other, steam heated, made of stainless steel, insulated, featuring: Bcodpjwhxq Dsfx Ahvow - automatic control valve and steam vent - 2 fan motors/fans on top - upward-opening lifting door with SEW drive - integrated control cabinet with controller and recorder for protocol/logging. Condition: used, cleaned, inspected

Condition: used, Name: Used Decanter Centrifuge Manufacturer: Alfa Laval Type: DSNX 4545 Year built: 2000 Max. bowl speed: 3.250 rpm Bcjdpfsxrkknex Ahvjw Hours of operation: 16.700 hours Material: Stainless steel Driving force: 37 kW Inner diameter drum: 450 / 258mm Permissible sediment density: 1,2 kg/dm3 Max. operating temperature: 100 C° Dimensions: L 3.700 x W 1.100 x H 1.300 mm Empty weight: Approx. 2.800 kg Technical doc.: Yes Accessories: Frequency converter, solids slide valve + channel, liquid discharge funnel and reversed eddy current brake Condition: Second hand Price: By request

Condition: used, Year of construction: 2014, functionality: fully functional, Beer bottling line Speed: 2,000 Bph Line composed of: BORELLI monoblock Year: 2014 Direction of travel: clockwise 12-pincer rinser Nozzle type: fixed Number of treatments: water and inert gas 16-valve filler Filling type: isobaric Pre-evacuation Degassing Single-head capper for crown cap Cap size: 26 mm TEKNINOX pasteurization tunnel Year: 2014 Pasteurization temperatures: pre-pasteurization and pasteurization managed by PLC ENOS labeler Year: 2014 Type of labels: linear with 2 stations Type of applications: Label and Back label on the same reel Collar Close SIAT cartons Year: 2014 Belt type both above and below PARMAMET clusterer Year: 2007 Format: 33x3 Accident prevention guards BELTS NOT INCLUDED Bcedpev Hrcxjfx Ahvjw Code: NP 578