Fan

JKF K-25D RO LG 90 4,0 kW R

Year of construction: 2026, condition: new, Magnetic separator for spool transport line Pipe magnet with 4 magnetic plates ( permanent magnet ) Hinged door for easy removal of the metal parts Tube diameter: 180 mm Available immediately Iedpfecqvhxjx Abxjtg Location: From stock 54634 Bitburg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm Itsdpfx Aefyadbebxjg 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Isdpfx Absdqzhbexetg Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: used, external dimensions: Itjdpfx Ajb N Nd Uobxog Width/Height: 65 mm Length: 2600 mm Weight: 70 kg

Condition: used, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm Ijdpfx Ajrh Niasbxjtg -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg

Condition: good (used), Exhaust fan Motor: 11kW Itsdpfxsgmnvye Abxsg Extraction capacity: 10.000m³ / h Pipe dimensions: see photos Used, immediately ready for use

Year of construction: 2006, condition: used, Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor -Manufacturer: Schäffer, rotary valve type 035102D11ST with drive -Drive motor: SEW Eurodrive 0.37 kW -Speed: 1380 / 11 rpm Itsdpfxsl A Azkj Abxsg -Inlet opening: 200 x 200 mm -Outlet: 200 x 200mm -Total dimensions: 1120/300/H300 mm -Weight: 117 kg

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Isdpfxeltrmuj Abxjtg Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: good (used), Three-phase motor, electric motor Iedpfx Aeb Enb Hobxjtg -Power: 11 kW -Speed: 1440 rpm -Shaft: 38 mm -Design: B5 -Protection rating: IP54 -Quantity: 1 available -Dimensions: 510/290/H330 mm -Weight: 86 kg

Year of construction: 1998, condition: used, Technical details: total power requirement: 1,1 kw volume capacity: 900 m³/h filter surface area: 6,0 m² Itedsu N Ad Nspfx Abxjg filter: 1 Stück weight of the machine approx.: 125 kg dimensions L x W x H: 0,74 x 0,62 x 1,8 m Applications: Suction of grinding dust, with other filter inserts is also welding smoke extraction possible - mobile device with rolls - with collecting container for coarse particles - cleaning interval adjustable up to 60 sec - Impulse cleaning, automatically after switching off the system - filtering separator Further technical data: - separation area 6.0 m² - separation rate above 99% - cleaned air remains in the working chamber - in the device is cartridge filter Ø 400mm, length 270mm - filter change manual by hand (maintenance door) *