Electric car bottom furnace 350°C 18,000 L

Ingenieurbüro Klein UHW 18000-350

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Rcodpfozxf Hkjx Apdsh Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Rjdsu I R Utjpfx Apdoch Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2022, overall weight: 68 kg, pressure: 10 bar, input voltage: 230 V, hose package length: 5,000 mm, CRYONOMIC COB62+ dry ice blaster. Demo machine used for presentations by the distributor in Poland, condition like new. Used for about 20 h of demonstrations. Rcsdpfxsq Rvako Apdeh Included in the scope of supply: machine, 5m hose, gun with standard nozzle. Max. blasting pressure: 10 bar. Air consumption: 0,5 - 5,5 m3/min. Dry ice consumption: 20 - 80 kg. Possibility to use additional abrasive module for more aggresive cleaning with abrasive. Possibility to use LED gun light. Simple and reliable operation and design backed by over 30 years of experience in manufacturing dry ice cleaning equipment. Manufactured in Belgium.

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Rcedpfx Apeghrguedsh Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI Rsdefbgz Iopfx Apdoch type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Year of construction: 2019, condition: new, Powder coating system Mini – for beginners The Spark / ROMER® powder coating system Mini consists of: Powder oven SLS-9 small (Internal dimensions: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approximately 12 to 16 weeks after the order Rcjdpfx Asctx Irepdeh Shipping costs will be calculated individually. (Self-collection is also possible) To provide you with a detailed offer for a system tailored to your specific application, we require further details regarding the application and batch size. We will then promptly prepare an offer for a suitable system with the dimensions you require. Payment terms: 30% down payment and the remaining 70% upon notification of shipping readiness.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Redpfjtmqi Dox Apdsch Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm Redpfx Aportrvyodsch -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 42 kW (57.10 HP), inner dimension length: 3,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 4,033 mm, total width: 1,800 mm, total height: 2,553 mm, fuel type: electric, Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Made-to-order manufacturing ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Coating Oven with Electric Heating – MATOVENB-151830 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Efficient ☘️ Powerful ☘️ Professional Curing ✅ Electrically heated powder coating oven ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at the end of the curing time ✅ Insulated door with special locking system ✅ Stable sandwich panel construction with strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shutdown after process completion ✅ Can be used with a mobile workpiece trolley ✅ Optionally with insert shelf system for small series ♨️ Also available as a high-temperature version up to 500°C. ⚡ Depending on the model/project, also available with electric, gas or diesel heating. ➖➖➖➖➖ Technical features: ✔️ Model: MATOVENB-151830 ✔️ Internal and external dimensions: see technical drawing in the image gallery ✔️ Electrical heating power: 42 kW ✔️ Fan capacity: 3,000 m³/h ✔️ Circulation fan: 1.50 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power: approx. 45 kW ±10 % ✔️ Digital temperature control ✔️ Temperature continuously adjustable up to 220°C ✔️ Inside: 1.2 mm galvanized steel ✔️ Outside: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 piece Other MATOVENB powder coating ovens in various sizes are available. Dimensions and technical data of the other models can be found in the attached catalog. ➖➖➖➖➖ ⚙️ Optional control functions ✅ PID control for precise temperature control ✅ Touchscreen control panel and smartphone control ✅ Ramp heating mode for defined temperature profiles ✅ Storage of process parameters ✅ Weekly and monthly reports at the touch of a button ➖➖➖➖➖ 🛡️ Safety and process control Safety sensor to prevent overheating Automatic shutdown in case of a fault Acoustic warning signals in case of errors Smoke extraction via automatic ventilation Rjdpfx Apjiiwa Dsdech ➖➖➖➖➖ ♨️ Ramp heating mode (optional) Control the temperature profile and holding times precisely: • Reach the target temperature in a defined time • Maintain the desired time • Controlled cooling down to the target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire purchase or installment payment options. ➖➖➖➖➖ Special sizes or individual designs are possible upon request. We will gladly plan a suitable solution for your workshop. Inquire now – make your company fit for professional powder coating!

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar Rjdpfxozbnr Aj Apdjch WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION