Polishing stand / belt grinding stand

IBS / IMM 72711

Condition: new, Wet exhaust system - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW Bsdpsci Tlrefx Amrsln

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Bljdpfsu Ngrqex Amrsn Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground Bsdpex Enapsfx Amreln • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Year of construction: 2003, condition: refurbished (used), machine/vehicle number: 50/140/03, GENERAL CHARACTERISTICS Ø Grinding Wheel Dimensions (OD x ID x width) 508 mm Regulating wheel width 254 mm Diamond dressing speed Ø508 x 254 mm Lubrication (Auto/Manual) centralizado automático / automatic lubrication CNC Brand FANUC CNC Model Series 18i - T Blsdpfxod Nw T Is Amren CNC Axes Nº 8 Grinding wheel width 254 mm ELECTRICAL CHARACTERISTICS Total Power 25 kW Voltage 220/380 v DIMENSIONS AND WEIGHTS Long 2150 mm Width 2200 mm High 3400 mm Weight 8000 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,000 h, overall weight: 3,900 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Internal machining adapter/shell kit • Preciflex active holder additional adapter set • A set of little used tool set is available for an additional price. Technical Machine Benefits • External turning tool holder Blsdpfxox D I T Rj Amron • Double external turning tool holder (left side) • Double external turning tool holder (left side) • End surface treatment holder • Internal machining holder • Double external turning tool holder (both sides) • Triple internal machining holder • Axial active tool holder (left side) • Axial active tool holder (left side) • Radial active tool holder Extra Information Machine still under power

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Bljdpowhzh Eefx Amron

Condition: excellent (used), workpiece diameter 60 mm Blsdpfxeunt Egj Amrjn grinding depth 30 mm clamping length 1000 mm weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: used, Year of construction: 1964, Technical details: shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Bsdju Ngr Dopfx Amrjln Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. centering block: -prismatic guide accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder -div. clamping and auxiliary tools *

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Bledpsw T Tpdefx Amrsn Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: good (used), Working wheel dimensions (od x id x width) Ø610x80xØ304.8 mm Brand CNC FANUC Model CNC 21 Oi TB Maximum length between points 1060 mm Max. travel Z axis 750 mm Max. length to be ground 600 mm Point height 225 mm Ø min/max to be ground 10 - 300 mm Max. weight of the piece 125 Kg Max. travel X axis 325 mm Blsdpfxstrguge Amrjn Grinding wheel speed 45 m/s Main motor power 11 Kw Working head speed 30 to 1000 rpm Working head cone MORSE 5 Working head motor power 12 Nm Tailstock cone MORSE 4 Tailstock quill travel 70 mm Tailstock hydraulic movement 150 mm Total power 22 Kw Length 2300 mm Height 1900 mm Width 2634 mm Weight 7750 Kg Accessories Cooling equipment with paper filter; MARPOSS meter, positioner and balancer;