CNC turning and milling center

Hyundai WIA L3000SY

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Nlodpfx Asy Hvp Iog Ioh

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Used, untested robot. No technical documentation available. Not tested. Njdpfx Agogu U Its Ijlh

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Nsdpfxsztctqe Ag Ielh Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL202140731, spindle motor power: 15,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 590 mm, type of input current: three-phase, total height: 2,145 mm, total length: 3,820 mm, total width: 2,081 mm, spindle nose: A2-6, overall weight: 5,100 kg, CNC Lathes with Milling NLX2000Y-500, Mori Seiki Year: 2014 Bar Capacity 65mm C axis 0.001 degree Control MORI M730B Machine Dimensions 3820 x 2081 x 2145mm Machine Weight 5100kg Maximum Cutting Diameter 366mm Maximum Cutting Length 510mm Milling Motor Power 5.5/3.7kW Milling RPM 10000rpm Nlodezua Egjpfx Ag Ijh Rapid Feedrates 30m/minute Spindle Motor Power 15/11kW Spindle Nose A2-6 Spindle Speed 5000rpm Spindle Taper MT #4 Standard Cutting Diameter 271mm Swing 923.8mm Swing 755mm Tailstock Body Travel 564mm Tailstock Quill Diameter 80mm Tool Size 25 x 25mm Turret Positions 12 Station X axis Travel 260mm Y axis Travel +/-50mm Z axis Travel 590mm

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Nlodpfx Agsv Ngrao Ijh Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Short Overview Nlsdozluq Eepfx Ag Ijh Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys.

Condition: ready for operation (used), Year of construction: 2021, A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible. Nlsdpfxszlt Sho Ag Ioh

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Nedpfsr A Hcbex Ag Ijlh Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Nsdpfx Agobql S He Ielh Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Nedpfxsz An S Re Ag Ielh Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.