Rotary table for milling machine

Huron

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM Gijdpfx Aqjwtd Dysxjw FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: excellent (used), Year of construction: 1986, RAFAMET type KCF 400 Gijdpfx Asytq T Heqxew Morę information on request

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 1,500 mm, feed length Y-axis: 700 mm, feed length Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, overall weight: 4,000 kg, 3-axis visual accuracy Table: 2000 x 460 mm Travel: 1500 x 700 x 550 mm Gjdpfx Aqjzh Ht Doxsiw Maximum spindle speed: 2066 RPM Weight: 4000 kg

Condition: used, Year of construction: 1988, x-travel 1800 mm y-travel 700 mm Gisdpfx Aszf Nuxeqxew z-travel 1200 mm ja 2 control Heidenhain 155 table: 700-2000 mm documentation ja dismantled ja weight of the machine ca. 12,5 t

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings Gijdpfx Ajx Sr Dfjqxow - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 18,000 rpm, table load: 4,000 kg, spindle motor power: 30,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Huron K2X 8 Five gantry milling machine was manufactured in 2006. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 2,300 × 1,500 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality milling capabilities, consider the Huron K2X 8 Five machine we have for sale. Contact us for further details. • Simultaneous 5-axis machining • Rotary axis (B): ±110° • Rotary table axis (C): 360° continuous • Table size: 2,300 × 1,500 mm • Spindle taper: HSK-A63 • Through-spindle coolant Additional equipment Gedpfx Aqszd Episxoiw • Chip conveyor • Portable MPG handwheel

Condition: used, Universal Milling Machine HURON NU4 Godpfx Aqszg H Tnsxeiw Travel X: 1100 mm Travel Y: 700 mm Travel Z: 500 mm Spindle SA50 (supplied with on reducer SA50/SA40) Spindle speed: from 30 to 2066 RPM Table size: 1435 x 460 mm Universal Head Spindle motor: 9 kW Scale 3 axes NEWALL Lubricant pump Voltage: 380 V Width with ends table: 2500 mm / without ends table: 1500 mm Depth: 2300 mm Total height: 1800 mm Weight: 3,1 T

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Gsdpfjw U Tlzsx Aqxeiw Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, centre height / mm O. 600 mm Weight: 340 kg Gijdozcghfopfx Aqxew

Condition: used, functionality: fully functional, HURON Milling Machine Make HURON Type MU6 Giedpszcdl Ujfx Aqxjw Table surface 2000 x 460 5 T-slots of 16 mm Spindle taper S40 Longitudinal travel 1,500 mm Cross travel 700 mm Vertical travel 500 mm 27 spindle speeds 30 to 2,066 rpm Rapid traverse 2,800 mm/min Spindle motor 8.8 Kw Feed motor 3.5 hp Coolant pump motor 1.6 hp Dimensions (L x W x H) 2,000 x 2,000 Approximate weight 5 tons

Condition: repair required (used), Year of construction: 2003, functionality: not functional, machine/vehicle number: H01267, turning diameter over cross slide: 690 mm, turning diameter over bed slide: 1,000 mm, turning length: 5,000 mm, Transmission defective, machine does not run. Otherwise in good condition. Giedpfozhuh Ajx Aqxow

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 1,900 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, overall weight: 8,000 kg, Heidenhain 3-axis control Giodpfxoyym Uns Aqxsw Table: 2235 x 700 mm Travel: 1900 x 1000 x 1000 mm Spindle: SA 50 Maximum spindle speed: 2066 RPM Automatic lubrication Weight: 8000 kg

Condition: ready for operation (used), Year of construction: 1991, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, overall weight: 4,000 kg, 3-axis Heidenhain display Advanced drive Automatic lubrication External electrical cabinet Gsdpfx Aqjwqcv Nsxjiw Table 2000x460mm Travel 1500x700x550mm Weight 4000kg

Condition: used, Year of construction: 1994, x-axis 7.300 mm y-axis 3.100 mm z-axis 1.500 mm control Heidenhain surface area B 2500 x L 7000 x H 750 mm no. of flutes 13 Stück flute distance 200 mm groove width 28H8 mm max. workpiece weight 4 t/m² drive capacity - main spindle 40 kW tool taper ISO 50 max. spindle tunring speed 4.000 U/min work spindle adjustment 3600 mm stroke senkrecht 1.250 mm spindle diameter 120 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Double-column gantry: Gisdozhcinjpfx Aqxow Gantry traverse speed 0–6,000 mm/min Feed rate 12 m/min - Heidenhain control system with handwheel - Spindle extension (VFL) - Angle milling head (WFKU) - Tool magazine - Auxiliary equipment magazine - Schmipke cooling system - Coolant tank - Chip conveyor - Hydraulic unit - Oil cooler - Operator platform - Comprehensive documentation available - Note: Operating conditions and installation layout in the appendix Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm 6100 x 1,000 mm table Gisdpfx Ajvz Aydoqxjw 4500 x 1,000 x 1,000 mm stroke 19-ton weight