Universal folding machine

HERA

Condition: good (used), Year of construction: 1978, working width: 2,000 mm, sheet thickness steel (max.): 4 mm, Equipment: emergency stop, foot remote control, We are selling our Hera folding machine, model UM III. 🔧 Technical details: • Manufacturer: Hera Nwsdpjycl H Hofx Ah Hob • Model: UM III • Working length: 2000 mm • Bending capacity: up to 4 mm steel sheet • Features: Back gauge for precise work The machine must be collected with a crane. Lifting equipment is not available on site.

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Nedpfx Ahjdqzbro Hjwb Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Year of construction: 1998, condition: ready for operation (used), Immediately available from location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Nodpsyaybaefx Ah Howb Motorised backgauge Backgauge controlled – 1000 mm Machine control: Siemens Simatic CP 7 Cutting length: 3050 mm Material thickness up to 10 mm Drive: 15 kW Weight: 8 t Price: €9,500 plus VAT, ex-location

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm throat 300 mm stroke 225 mm working feed 10 mm/sec Nwedpeuiz I Dofx Ah Hob return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Nwsdpfx Ahjdqzcvs Heb Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: Nwedpeuagxpsfx Ah Hsb - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: ready for operation (used), sheet width 2020 mm plate thickness 2.5 mm ST upper clamping bar adjustment 250 mm Lower beam adjustment 80.0 mm bending speed 5.5 sec / Hub bending angle max. 0 - 180 ° Control konv. work height max. 930 mm back stop - adjustable ca. 215 mm engine output 2.6 kW weight 1750 kg range L-W-H 2800 x 1200 x 1450 mm - in checked conditoins - machinevideo - ?v=kFXtKjDlV3k Features: - Robust electric-driven folding machine - Bending angle adjustment via electric potentiometer Nsdpfx Asxabngeh Hswb - Manual backgauge * Adjustment via handwheel from the rear - Manual lower beam adjustment - 1x freely movable double foot switch - Main switch at the front

Condition: ready for operation (used), Year of construction: 2006, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 7522062024-E, overall weight: 8,630 kg, For sale: Hydraulic press brake type CNC light 30120. - 3 axes: Y1/Y2/X axis - CNC control CYBELEC DNC 60 Nwjdpfsx E Sx Aex Ah Hjb - CNC-controlled crowning device - 2 support arms - Intermediates for upper tool clamping, Amada/Promecam system - Upper tool 1010/75 degrees, segmented, hardened and ground - Lower tool holder for 60 mm dies, Amada/Promecam system - Die with 4 V-openings (16/22/35/50 mm), type 2009, hardened and ground - Laser safety device (mounted on the upper beam) The machine is in good condition and fully functional. - Collection only, ex works

Year of construction: 1988, condition: used, sheet width 1500 mm plate thickness 3 mm weight of the machine ca. 4 t Nodslp U Txepfx Ah Howb dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: good (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 7106, working width: 3,000 mm, sheet thickness (max.): 4 mm, Equipment: type plate available, hydraulic swing beam shear HERA TS 3000x4 with feed unit Year of manufacture: 2002 Nwedpox Td Aiefx Ah Hob

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: 081913, Technical Data: - Pressing force: 135 t - Working width: 3100 mm - Clearance between uprights: 2600 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm Nsdpfox I N Aksx Ah Howb - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Drive: 400 V / 7.5 kW - Oil capacity: approx. 300 l - Space requirements: approx. W 3300 x H 2400 x D 1600 mm - Weight: approx. 7500 kg Equipped with: - Swivel arm control panel with HACO ATS 560 controller for setting press depth, pressing force, and backgauge - Motorized backgauge - 4-way universal die + pointed tool - Incomplete gooseneck tool - Two-hand operation console with foot switch - Support arms

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Nwodpfev H Hfnex Ah Hjb Machine is in good conditions.

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate Nwodpfx Aheu Nfm To Hob - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke Nodjxaal Ropfx Ah Howb - Read the operating instructions before using for the first time

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg Nedsq A I Upjpfx Ah Hswb good condition