Lathe-conventional-electronic

HEIDENREICH & HARBECK 21 RO

Condition: used, turning diameter over bed 430 mm turning diameter over slide rest 230 mm turning length 1000 mm centre height 215 mm centre distance 1000 mm Hedpsxwp Enefx Aahsp spindle bore 56 mm spindle turning speed range 19 - 2000 U/min total power requirement 7,5 kW weight of the machine ca. 1,9 t dimensions of machine L x W x H 2,78 x 1,25 x 1,40 m Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: Hsdpfx Ajv Rgzweahep 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Hedpfot Ipi Ijx Aahop Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Hedpfx Aodzwwnsahop -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut Hsdpfx Aaoy H E Akshop • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Optional accessory: chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Technical Specification Counter Spindle No Driven Tools No

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg Hodswmlknjpfx Aahsp max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and Hsdjtqqm Aepfx Aahjp without flanges, wet grinding attachment with paper band filter

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm turning length 1000 mm spindle bore 56 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,4 x 0,8 x 1,6 m Hjdjyiu T Ajpfx Aahep

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm Hedpfexxig Uex Aahsp 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 435 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 640 mm, center width: 1,500 mm, turning diameter over bed slide: 640 mm, swing diameter over cross slide: 435 mm, quill stroke: 190 mm, quill diameter: 100 mm, quill travel distance: 190 mm, center height: 320 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, swing diameter over bed slide: 640 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed length X-axis: 365 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, bed width: 1,800 mm, workpiece weight (max.): 1,600 kg, type of input current: AC, travel distance cross slide: 365 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 315 mm, torque: 640 Nm, travel distance X-axis: 365 mm, travel distance Z-axis: 1,500 mm, workpiece weight between centers: 1,600 g, spindle diameter: 100 mm, workpiece diameter between centers: 640 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide / top slide: 365 mm / 145 mm Center height over flat bed: 320 mm Distance between centers: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Turning tool section: 32 x 25 mm Hjdowywxdjpfx Aahep Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (overall): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed rate transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Metric thread pitches: 0.1–400 mm Quill diameter / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Setover tailstock center: Ø 150 mm Workpiece weight (max.): Between centers: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4" color LCD, showing (among others) spindle speed, feed rate, position, tool, load