Control system

HEIDENHAIN TNC 128

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm Gjdpfeh N Sc Esx Ah Eobw - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Gbsdpfx Aeyu Nb Ejh Eew Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Year of construction: 1990, condition: used, 2. Tool turret heads, manufacturer DUPLOMATIC, year of manufacture approx. 1990, type: BSV-N250 8/20-110/50. Tool holder size VDI50. Tool stations: 8. Center height: 125 mm. Price per piece. Godpfxobaf Spj Ah Esbw

Year of construction: 1994, condition: good (used), Spare parts for MONFORTS CNC lathes KNC 5 /1250 (electronics identical to KNC 4 - KNC 8) 1. Handwheels, price: €1500 1. All axis motors, price: €2000 1. Cross slide, price: €1800 1. Tailstock, price: €1800 Gedpsd Nmnwefx Ah Eebw 1. Ball screw with nut, Z-axis, price: €750 1. Cover for ball screw, Z-axis, price: €250 1. Chip conveyor for turning length 1250mm, with coolant pump, price: €2800 1. Headstock, price: €1800

Year of construction: 2000, condition: good (used), Parts shown by hand not included. 1350 mm length, D 480 mm, Gbedpfx Aspy Eqmsh Esw

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Gedpfxofzk Ews Ah Esbw

Condition: like new (used), Kitagawa MR200 rotary table for a MAZAK machine. Mitsubishi HG-H104T-D48 motor. New, unused condition. Godpsy H Ewnofx Ah Ejbw The table was never used and was intended to be installed in a Mazak machine.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R7 A-Q-2701, Used CNC lathe Gedpfx Ahsx Tbcye Eobw Manufacturer: EMCO Model: Hyperturn 665 Year of manufacture: 2002 Control: 840 D With chip conveyor

Condition: used, Year of construction: 2002, machine/vehicle number: 2204, Universal radius metal belt grinder lot no. 24541 Technical data: - Sanding belt dimensions 2000 x 75 mm - Surface sanding opening 400 x 75 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Working height 960 mm - various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm Gbjdpfx Ahsviudqo Eew - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12.7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12.7 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X stroke : 35 [mm] - Y stroke : -9.5/+28 [mm] - Z stroke : 48 [mm] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/79.5 [mm] END ATTACHMENT Gbedpeuhaxfefx Ah Esw - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] - X/Z stroke : 415/138.5 [mm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 10000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Traub TX8i - Rotating guide bush - Coolant tank - Bar loader : LNS TRYTON HYBRID