Control unit

Heidenhain iTNC 530

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Gbjdeylw D Aepfx Ah Eow Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010 Gbjdpfx Ahsvxa Tpo Ejw

Condition: defective spare-parts repository (used), Year of construction: 2004, Spare parts from Deckel Maho DMF 360 linear for sale. The machine is used exclusively as a spare parts donor. The machine is complete in all components. For example: iTNC 530 control, complete control cabinet, SK50 spindle as new, cooling unit, partition wall, rack wall, SK50 swivel head Hirth (defective), chip conveyor, high-pressure coolant system 80 bar, various other used parts in good condition. Prices on request, plus 19% VAT. Gbsdpfx Ajytx Dmeh Eew

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Gbjdpfxewym Nfo Ah Eow Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Gsdpfxjzrd Tvo Ah Eebw

Condition: used, Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, Gedpfel Ha R Rex Ah Eobw -Measuring range: 35-60mm -Dimensions: 115/450/H60 mm -Weight 1.6kg

Condition: excellent (used), Year of construction: 2013, Model: YA-1 TAR81 E01 Axes: 6 Maximum load capacity: 8 kg Weight: 204 kg Maximum reach: 1796 mm Year of manufacture: 2013 Country of origin: Japan A brand-new Panasonic 350 A welding unit is included in the scope of delivery. Gbodpfexfg Snex Ah Eow

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control Gjdpfx Aofzq Stjh Esbw • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: excellent (used), Turntable length: 3330 mm Max. load capacity: 500 kg Rotational speed: 16 rpm PANASONIC robot – serial number A0225 M Max. payload: 6 kg Gjdjw U Agbspfx Ah Esbw Reach: 1374 mm Control unit: YA-1TCR61E00 Safety cabin with ALBANY ASSA ABLOY doors Dimensions: 9400 × 2600 × 2900 mm Weight: approx. 5000 kg

Condition: used, TVM2.1-50-220-300-W1-220-380 TDM1-2-50-300W1-220V TDM1-3-030-300-W1-0 TDM1.2-100-300-W1 TVM2.1--50W1-220V TDM1.2-100-300W1 TDM1.2-100-300-W1-220 TDM1.2-100-300-W1-220 TDM1.2-100-300W1 Gbjdpfx Aefd Tlmoh Esw TDM1.2-100-300-W1 TDM1.2-100-300-W1-220 TDM1.2-100-300W1 TDM1.2-100-300W1 TDM1.2-100-300W1 TDM1.2-100-300W1 TDM1.3-100-300-W1 TDM1.2-100-300W1 TDM1.2-100-300W1 TVM2.1-50-220-/300-W1-220/380 TDM1.2-050-300-W1-220/S102 TDM1.2-100-300-W1 TDM1.2-100-300W1S0102 12100-300Wi TDM1.2-30-300W0 TDM1.2-050-300-W1-220 TVM2.1-50-220/300-W1-220/380 TDM1.2-050-W1-SO102 TDM1.2-100-300W1S0102 TDM1.2-100-300-W1-220 TVM-2.1-50W1-220V TDM1.2-050-300-W1 TDM1.2-050-300-W1-000 TVM2.1-1-50W1-220V TDM1.2-100-300W1S0102 TDM1.2-100-300-W1 TDM1.2-100-300-W1-0 TDM1.2-50-300-W1 TDM1.2-100-300W1 TVDI1.3-15.03 TDMI1.2-050-300-WI-000 TDMI1.2-030-300-WO TDMI1.2-050-300-WI TDMI1.2-50-300-WI TDM1.2-30-300-WO-1/93 TDM1.2-30-300-WO TDM1.2-30-300-WO TDM1.2-30-300-WO TDM1.2-030-300-WO TDM1.2-30-300-WO TDM1.2-050-300-WI-000 TDM2.1-030-300-WI-2 TDM1.2-30-300-WO TDM1.2-30-300-WI TDM1.2-030-300-WI-220 DD503.1-W030-RA02-02-FW KDS1.1-100-300-WI-220 KDS1.1-150-300-WI-220 KDS1.1-050-300-WI-220 KDV3.1-100-220/300-220 KDS1.1-050-300-WI-220 KDS1.1-100-300-WI-220 KDA3.2-150-A00-WI Used Indramat parts Price on request