Saddle Stitcher

Heidelberg ST 100.1

Year of construction: 1998, condition: ready for operation (used), Steel saddle stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual system (expandable to 2) 4 double feeders Stitching station with lateral measuring control Bedpfx Ahsq Rw Exovecw 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 eyelet stitching heads Lateral measuring control Three-knife trimmer with center cutting device transfer marking table shingle delivery 2 pumps documentation

Condition: like new (used), Year of construction: 2022, See pictures Bedpfxexl Ugae Ahvocw

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Bodpfowu Sptox Ahvjcw Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: used, Year of construction: 2007, The Horizon StitchLiner 5500, manufactured by Horizon in 2007, is a machine with a format of 350 x 500 mm currently in production and located in Germany. This machine includes two VAC-100a and VAC-100m collating towers, an ST-40 stacker, an ACF-30 accumulator and folder, an SPF-30 saddle stitcher, an HTS-30 three-knife trimmer, and a TB-30 transport belt. Key features include 20 stations, a U-shaped layout for efficient space utilization and easy monitoring, inline production from collating to the finished product, and variable data processing for personalized printing. It offers fully automatic format adjustment for quick job changes and a touchscreen for user-friendly operation, even for less experienced operators. The specifications include handling sheet sizes from a maximum of 500 x 350 mm to a minimum of 148 x 120 mm, with a paper weight range of 40-350 gsm. It can process thicknesses from 8 to 200 pages, with a maximum spine thickness of 5 mm, and achieves a production speed of up to 5,500 booklets per hour. Technical details include a trimming size (untrimmed) from a maximum of 350 x 250 mm to a minimum of 140 x 103 mm, and a trimming size (trimmed) from a maximum of 312 x 230 mm to a minimum of 120 x 95 mm. The machine requires a power supply of 400V/50Hz. The delivery terms are FCA. Format: 350 x 500 mm Equipment: This StitchLiner 5500 includes the following components 2x VAC-100a and VAC-100m Collating Towers ST-40 Stacker ACF-30 Accumulator and Folder SPF-30 Saddle Stitcher HTS-30 Three-Knife Trimmer TB-30 Transport Belt Key Features:- 20 stations- U-shaped layout: Efficient space utilization and easy monitoring- Inline production from collating to finished product- Variable data processing: Handles personalized p printing- Fully automatic format adjustment for quick job changes- Touchscreen for user-friendly operation, even for less experienced operators Bjdpfevfx Ncjx Ahvjcw Specifications:- Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm- Paper weight: 40-350 gsm- Processing thickness: 8-200 pages (max. 5 mm spine thickness)- Production speed: Up to 5,500 booklets/ Technical Details:- Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm- Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm- Power supply: 400V / 50Hz- Space requirement: Min. 5,709 x

Condition: ready for operation (used), Year of construction: 1999, SM 74-5P2 L, 1999 year Fully rebuild and renewed by heidelberg 2012. All auto washes Bjdpfxsyi Uxxs Ahvecw autoplate Temperating rollers technotrans 198 mil imoressions.

Condition: excellent (used), Year of construction: 2017, Ref:11008 . 2017 Morgana AutoCreaser Pro 33 + AutoFold Pro High speed, combination creasing & folding line. User friendly, single operator, standalone machines that are run in tandem to crease and fold digitally printed, heavy weight or cross-grained stock. Features: Morgana AutoCreaser Pro 33: Uses a unique creasing rule and matrix system to prevent cracking & tearing. 7" 'SmartScreen' touch screen controls all main functions. Automatically calculates where the creases need to be and sets them accordingly. Alpha-numeric memory allows an unlimited number of jobs to be stored. ‘PosiFeed’ feed system allows product to be piled higher and able to feed difficult stocks. Morgana AutoFold Pro: Can be aligned to Morgana AutoCreaser Pro to give perfectly folded results on a wide range of both digitally or litho printed stocks. It is simply wheeled up to the creaser and the height of its vacuum feed conveyor is adjusted to the exit height of the creaser. The same 7" SmartScreen, instructs on length of pre-creased sheet and which fold to produce. Alpha-numeric memory allows an unlimited number of jobs to be stored. Crease & fold without cracking, Flying knife technology prevents scuffing and marking on digital stocks. Specification: Feeding System: Bottom suction feed Max. Sheet: 700mm x 330mm (27.5” x 12.6”) Min. Sheet Size (in automatic mode): 210mm x 140mm (8.5” x 5.5”) Max. Paper Thickness: 0.4mm (varies according to hardness, fold type & substrate) Max. No. Creases per Sheet: 16 Min. Distance Between Creases: 0.1mm Max. No. Stored Programmes: Unlimited Min. Crease Distance from Leading Edge: 2.5mm Min. Crease Distance from Tail Edge: 35mm In Hand Feed Mode up to 2499.9mm to Last Crease can be Programmed. Speed per Hour (A4 in half): 8500 Speed per Hour (A5 in half): 11000 Bedpew U Ddbefx Ahvocw Dimensions: L: 1450mm H: 1224mm W: 522mm Weight: 121Kgs (+50Kgs packing) Power Requirement: 1 phase 220 / 240v AC Speed per hour (A4 in half): 6240 sph. (Autofold Pro) Power requirement: 240V, 50/60Hz

Condition: reconditioned (used), Year of construction: 2003, Cyklop XZE-311 strapping press Year of construction: 2003 Bjdjtqpadopfx Ahvjcw Passage width: max. 2200 mm Passage height: max. 2200 mm Belt guiding distance: 625 / 440 Roll pitch: 60 mm Strapping speed: 2.9 m/s Strap tensioning force of the strapping unit: adjustable up to 2000 N Pressing force: adjustable from 5 to 48 kN

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Consisting of Gathering machine Wohlenberg Sprinter 7010 Description: - Hand feeding station Bcjdpfxjtt Ug Ie Ahvew - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) Bjdpfxjw D E Sae Ahvscw – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: R6, working width: 420 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 500 kg, input current: 16 A, compressed air connection: 5 bar, input frequency: 50 Hz, Spiral forming and binding machine for metal spiral binding of books. Forms and inserts wire coils into pre-punched notepads and diaries. Bedpfxjtltr Se Ahvjcw Uses plain or coloured nylon-coated steel wire. Equipped with 16mm diameter forming mandrels. ( other sizes available on request) Range available: 6.- 22mm Ideal for notepads and student's diaries. Auto-eject with exit conveyor. Production speed up to 500 items per hour. Power requirements: 400 VAC 1 Kw Compressed air: 5 bar