Edge banding machine Hebrock EURO 3001

Hebrock EURO 3001

Condition: new, Holzkraft minimax me 35 t s edge banding machine 5507235 For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm and workpieces from 8 - 50 mm Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10" large touch screen: HMI Maestro Active Edge; Graphic display of all machining units and their operating status; Graphic simulation of machining operations; Control of all machining units; Regulation of glue pot temperature; Assistance functions for setting up the machine according to the machining program; Error diagnostics for quick correction of simple errors; Statistics on machining parameters; USB connection; Preparation for network connection. Excellent accessibility to the working units thanks to the large hood that ensures protection and noise reduction Monobloc steel construction ensures high stability and rigidity of the machine Automatic aggregate positioning when changing the slab thickness Automatic application of strip edges with edge magazine (me 35 t s): The strip edges of solid wood are automatically loaded and synchronized with the panel guide Panel feed is made by feed chain with rubber glides Extendable workpiece support Quality Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 3314mm width/depth (product) approx. 1085mm Height (product) approx. 1300mm weight (net) approx. 545kg Flush radius milling unit Flush radius milling unit Input power 2 x 0,35kW Flush radius milling unit Cutter diameter HM 55,3mm flush radius milling unit cutter speed 12000min¯¹ flush radius milling unit suction port diameter 2 x 60mm Electrical data Supply voltage 400V Mains frequency 50Hz Glue unit Glue tank input power 0,25kW Glue pot working temperature 190°C Glue tank suction port diameter 60mm Glue tank filling capacity 0,8kg Pneumatic connection Working pressure 6,5bar Feed Feed input power 0,55kW Feed speed 7m/min Edges edge thickness roll material 0,4 - 3,0mm edge thickness strip material 0,5 - 5mm Nodpfx Aekknbqofrsli Pre-milling unit Pre-milling unit suction nozzle-Ø 2 x 80mm Pre-milling unit power input 3kW Pre-milling unit cutter speed 7200min¯¹ Pre-milling unit diamond cutter-Ø 80mm Pre-milling unit cutter height 56mm Pre-milling unit material removal 0,5 / 1 / 1,5 / 2mm Scraper aggregate Radius scraper 2mm Buffing aggregate buffing unit input power 2 x 0,14kW buffing unit speed 2800min¯¹ Workpiece workpiece thickness 8 - 50mm Workpiece length min. 120mm Workpiece width min. 110mm Holkraft dealer - accessories available on request!

Condition: good (used), Year of construction: 1991, cutting width (max.): 1,050 mm, cutting height (max.): 135 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 930 kg, power: 5.5 kW (7.48 HP), Equipment: scorer, MAKA SC 3200 Sizing saw with scoring unit Manufacturer MAKA/Griggio Technical data: Trimming carriage 3200mm cutting length 3300mm Cutting width right from saw blade 1050mm saw blade max. 400mm cutting height 135mm Saw blade can be tilted 0-45°. cutting height at 45° = 90mm (400'er saw blade) motor 5,5 KW/400 Volt Nsdpfx Aep H Tgbjfroli 3 speeds 3/4/6000 rpm motor scorer 0,75KW Scorer Ø 125mm suction connection 120mm wide and narrow protection hood dimensions 3250x3100x830mm Weight 922 KG

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang Nodpfx Afsxfh Tmsrsli HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: like new (used), Year of construction: 2020, functionality: fully functional, height adjustment type: mechanical, input voltage: 400 V, space requirement height: 1,200 mm, Edgebander equipped with: calibrators, edging material magazine, interchangeable hotmelt glue pot for EVA or PUR, flush trimming, rounding trimming units. Nodowy Ugxepfx Afrjli

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Nljdsw Igg Sspfx Afrsi Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: used, Kündig Duplex 1350 KdS-E Brilliant + Lacquer Quality product from Switzerland Constant table machine / automatic Head adjustment Wide-belt calibration and fine grinding machine 1st unit: Combination unit with 90 Shore contact roller and sanding pad unit with electronically controlled segmented sanding pad Contact roller level continuously adjustable according to the grit scale Swivel sanding unit for diagonal sanding Infinitely variable sanding belt speed 3 - 18 m/sec Oscillating belt sanding 2nd unit: Sanding pad unit with electronically controlled segmented sanding pad Belt drive motor power 15 kW Working width 1350 mm Max. workpiece thickness 160 mm Feed speed continuously adjustable 3 - 15 m/min Sturdy vacuum table with varnish carpet Automatic workpiece thickness adjustment Nlsdpfx Afew Elvzsrei ENORMATIC quick adjustment with feed trigger (for long workpieces) PLC control with LCD screen for automation and management of all work programs Infeed and outfeed tables with roller support Machine is WORKSHOP REFURBISHED in TOP condition CONDITION from Lieboch warehouse

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm Nlsdpfofpb Nmjx Afrji clamping height 140 mm height adjustment 125 mm suction socket 2 x Ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Table milling machine with one-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Positioning control for height and swivel adjustment with zeroing of the height and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Push button for spindle start and stop Left and right rotation Cutter quick clamping device Fine planed cast iron table with rigid frame support Control panel at the bottom of rigid frame support Milling stop 216 total adjustment via handwheel and LCD display incl. cast stop plates and aluminium splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, not exchangeable CE-conform GS tested

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW Nledpew Nadtjfx Afroi - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Nsdpfx Afsuxqzuersli Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Nodpfx Afow I H Rkoroli Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim