Four side Planer

Guilliet KXY

Condition: used, Weinig Guilliet KXY automatic planing and chamfering machine for planing timber on all four sides, in very good original condition and including planing heads. Technical data: - Spindles: 4 - Spindle 1: Bottom - Spindle 2: Right Fsdpfxjzrxzzj Akvjpk - Spindle 3: Left - Spindle 4: Top - Working width: 180 mm - Working height: 120 mm - Feed rate: approx. 10 m/min

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Fpsdpfx Aexnlflekvok

Condition: used, Year of construction: 1992, Guilliet C four-sided milling machine, year of manufacture 1992, in good condition, including 3 milling heads (1 x 135 x 100 mm, 2 x 180 x 100 mm), including reversible cutting inserts. Fpedpfxezq Db De Akvek

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Length of the planing table: 2,100 mm - Tool spindle diameter: 30 mm - Planing head diameter: 100 mm - Speed of the planing shafts: 6,000 rpm - Working width: 30–180 mm - Working height: 6–120 mm - Motor power (bottom, left, right): 3.7 kW each - Upper motor power (thickness shaft): 5.5 kW - Feed speed: 6 and 12 m/min - Electric height adjustment - with 1/10-step control - including cycle-controlled feed roller - Including planing heads - Extraction ports 160/120/120/140 mm Fsdpfezk N I Asx Akvspk Availability: available at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Fpsdpfxow I U E Ao Akvek Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm Fpjdpfsxgkf Uex Akvjk With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Year of construction: 1990, condition: excellent (used), Max planing height 120mm Max planing width 180mm Fpedpoih Hztefx Akvjk Electric height adjustment 2 feed speeds 6 and 12 m / min

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width Fpjdpforigxyex Akvok 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: good (used), Year of construction: 1983, functionality: fully functional, max width of workpiece 180mm max height of workpiece 120mm 4 spindles: Fjdoqwg Anepfx Akvjpk 1) horizontal bottom 180mm 3,7kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 180mm 5,5kW diameter of spindles 30mm

Condition: used, Year of construction: 1985, Working width: 180 mm Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power, bottom spindle: 3.7 kW Motor power, right spindle: 3.7 kW Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Fpedpfxozdzbns Akvok Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Dust extraction connection: Machine length: Machine width: Weight:

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm Fjdpfxsl R Nnne Akvjpk

Condition: used, Year of construction: 1993, incl. suction bellwith controlled infeed rollerusedmake Guilliettype KXYyear of construction 1993machine no. 2841GS-wood dust testednumber of spindles 4spindle arrangement u-re-li-omotors 3,7 kWplaning width approx.30-180 mmplaning height approx. 6-120 mmmotor brakestable length approx. 2000 mmknife system strip planing knifepre-feeding cuttercardan feedpneumatic pressure of the infeed roller - infeed cycle controlledprotective hoodinfeed before planingfeed speed 12 m/ctrical adjustment thickness shaftdigital displays height - widthsuction connection 250 mm / 3 x 120 mm / 1 x 140 mmspace requirement approx. 3200 mm x 1200 mm x 1500 mmweight approx. 1200 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition, as viewed,without warranty and guarantee Fpsdpfx Aksvwfuiovek

Condition: excellent (used), Year of construction: 1989, Four-side planer Manufacturer: GUILLIET Type: KXY 180 Year of manufacture: 1989 Number of spindles: 4 Working width: 220 mm Working height: 120 mm Planing table length: 2,000 mm Feed power: 1.5 kW Feed speed: 4.5 - 27 m/min, stepless Total power: 15.5 kW Spindle speed: 6,000 rpm Fjdsvuxymopfx Akvepk Weight: approx. 1,600 kg Dimensions: 3,700 x 1,500 x 1,300 mm

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm Fpsdjhlp D Nopfx Akvsk -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.