Extraction unit Gruss, 128 bags

GRUSS

Year of construction: 1976, condition: defective spare-parts repository (used), manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical data: sheet width: 1000mm sheet thickness: 0,7mm Pgodpfx Adsg Ul S Dsnew Profiling stations driven: 12 pieces shaft diameter: 55mm drive: 55kW infeed width: 1100mm distance between the stands: 650mm Dimensions of the individual components: roller table 1: 6.000 x 1.700 x 1.700 mm roller table 2: 6.000 x 1.700 x 1.700 mm Drive 1: 3,800 x 1,000 x 1,500 mm Drive 2: 6,300 x 1,000 x 1,500 mm reel: 3,000 x 1,300 x 1,600 mm shear: 1.700 x 650 x 1.000 mm Euro pallet: 1,200 x 800 x 1,200 mm For the whole machine 2 trucks are needed! Accessories/ special equipment: Decoiler Profile shear Remark: The switch cabinet is missing. The machine is therefore not ready for operation.The machine is used as basic setup for roof trapezoidal profiles with high beading.

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter scrap conveyor strip edge preparation entry table Pgedpouc Shujfx Adnew forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction electrics

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change) Pgsdpfx Adjdf S Szonow

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min Pgodpfxeuc Sw As Adnsw working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Year of construction: 2021, condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm Pedjg E S Inepfx Adnsgw number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm Podpfx Adsfrvzvjnsgw column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Pgodpfxotiy Nts Adnew Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: good (used), Year of construction: 1997, 1. Barberan Profile Wrapping Machine - Reserved MODEL RP-30 Profile width: 10-280 mm Profile height: 2-80 mm Minimum profile length: 500 mm Maximum roll material width: 280 mm Veneer strip width: 25-280 mm Pedsn Nv N Ujpfx Adnogw Glue temperature: 220°C Transport roller diameter: 200 mm Transport roller width: 2 x 15 mm Maximum roller spacing: 250 mm Feed speed: 10-60 m/min Working height: 900 mm Photos no. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 2. Friz Profile Wrapping Machine - Reserved Model Friz MR 30 Table length approx. 3200 mm Friz MR 30 profile wrapping machine for films up to 300 mm wide Hardo adhesive applicator Pressure rollers Labelling table Everything as shown in the pictures, additional photos on request Dimensions approx. 15000 x 3000 x 3000 mm Weight approx. 5000 kg Photos no. 11, 12, 13, 14, 15, 16, 17

Year of construction: 2008, condition: excellent (used), 4x Machines available Length 1150 mm Width 530 mm Psdpfxomf Tk Ao Adnegw

Condition: new, Year of construction: 2025, total width: 10,000 mm, total height: 2,700 mm, working range: 2,500 mm, total length: 10,000 mm, compressed air connection: 10 bar, type of input current: three-phase, warranty duration: 12 months, overall weight: 4 kg, input current: 18 A, working width: 1,700 mm, working height: 180 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,700 mm, power: 11 kW (14.96 HP), 1 Operator pallet production equipment is designed to produce standard and non-standard pallets up to 2500 mm long. The boards are loaded into the pallet template manually. Pallets are easily programmed and saved in the Windows operating system. Automatic pallet unloading make the operator's work easier, there is no need to unload pallets manually. After setting the number of pallets to be loaded, the ABB Robot will unload the pallets automatically. Installation capacity per 1 shift: 300 – 500 pallets. Podpfxewm Ihcj Adnegw