Fermentation / storage / flotation tank (2 pieces)

GROSS Behälterbau GmbH

Condition: used, Year of construction: 2000, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve Capacity: 431 hl Klsdpfx Aoxbqg Ieh Njl Operating pressure: 4 bar Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Condition: used, Year of construction: 2016, Overview  This isobaric triblock bottling machine was manufactured in 2016 by the Italian company Rizzolio. It is designed for the bottling of carbonated beverages and combines rinsing, filling, and capping in one compact unit. The machine is still installed, can be connected to demonstrate basic functionality, and is available for sale due to the owner's need for a larger brewhouse. Technical data  Capacity: approx. 500–650 bph (bottles per hour) Formats: Bottle diameter: 30 to 120 mm Bottle height: 140 to 350 mm Caps: 26 or 29 mm crown caps Filling Type: Counter-pressure / isobaric Rinsing heads: 4 Filling valves: 4 Capping unit: 1 Power: 0.75 kW Voltage: 240V, 50Hz, single phase Approx. dimensions Length: 1370–1410 mm Depth: 640 mm Height: 2100 mm Kjdpfxjwfh D Ij Ah Nell

Condition: used, Year of construction: 1985, Pressurised tank cellar with three upright stainless steel pressure tanks of 207 hl each and with double-seat valve solution on the operating level. All tanks can be cooled. Additional title: 3 pressure tanks Volume per tank: 20700 l Effective cooling surface: 18 m² Max. working overpressure inner tank: 4 bar Kljdew Tmqnjpfx Ah Njl Length: 2,10 m Width: 2,10 m Height: 6,66 m Weight: 1985 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve, Printed tank books and drawings available Periphery: Inlet & outlet pipework via double-seat valves

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Capacity: 96450 l Operating pressure: 2 bar Kjdjvcqnlspfx Ah Nell Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Operation by waterfall system. Control panel. Klsdpfxewn Hgtj Ah Nsl Valves.

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Total height/tank: 7360 mm Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Ksdsvcqynepfx Ah Njll Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves

Year of construction: 1982, condition: used, Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt Additional title: Outdoor tanks Capacity: 580 hl Operating pressure: 2 bar Kjdpfsvcq A Asx Ah Noll Operating temperature: 20 °C Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling Material: stainless steel Position: vertical Base construction: Short skirt support Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW Kljdpehhc Ixofx Ah Nol - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: used, Used syrup room with pasteurizer Alfa Laval Kedpfxexywg Ss Ah Nsll This second hand Syrup Room is a complete processing section designed for the preparation of concentrated base syrups and finished syrups for beverage production. Engineered for integration upstream of a premix and an isobaric filler, it supports efficient industrial packaging workflows in a used bottling line. It is ideal for beverage production environments that require reliable sugar dissolving, thermal treatment, and hygienic storage prior to mixing, carbonation, and filling. The system covers the full syrup preparation sequence: simple syrup creation from treated water and sugar, finished syrup blending with concentrates, acids, colors, and flavors, and hygienic storage in stainless steel tanks. A dedicated pasteurizer helps ensure product stability, while mixers and pumps support consistent, repeatable processing. This Syrup Room is well suited for soft drink formulations such as cola, tonic, and other flavored carbonated beverages, and it integrates seamlessly with premix units that add CO2 just before the filling machine. The plant layout and component selection make it a practical solution for upgrading or expanding a used bottling line in the beverage production sector. Technical Specifications & Performance Data Sugar dissolver: AICMA Pasteurizer: Alfa Laval Storage tanks (finished/simple syrup): 4 x 4,000 L Cavalzani Storage tanks (finished/simple syrup): 3 x 2,000 L Bertuzzi Mixers and pumps: Included for circulation, transfer, and blending Process materials: Treated water, sugar/sweeteners, fruit concentrates, flavors, additives Construction: Stainless steel AISI 304/316 process equipment Cleaning: CIP-ready design for sanitary cleaning in place Advanced Automation & Control Systems The Syrup Room features a centralized control panel with analog/digital selectors for process management, enabling operators to supervise dissolving, thermal treatment, storage, and transfer operations. Dosing can be achieved using precision pumping and flow control to maintain recipe accuracy. Hygienic design, sanitary valves, and instrument connections support repeatability and quality. The configuration is suitable for integration with plant-level automation and recipe control, with clear operator interfaces that simplify changeovers and routine adjustments while supporting safe and reliable operation. Production Line Integration Capabilities This processing plant is designed to feed finished syrup to a premix unit, where it is blended with treated water and CO2 immediately before the isobaric filler. It can be integrated inline with existing beverage production and industrial packaging equipment and is compatible with used bottling line layouts handling both PET and glass bottling downstream. Recipe-based operation supports multi-flavor portfolios, and transfer connections allow straightforward tie-in to upstream water treatment and downstream premix and filling systems.

Condition: used, functionality: fully functional, tank capacity: 30,200 l, total height: 6,000 mm, inner diameter: 2,800 mm, overall weight: 1,400 kg, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 litres - Material: 316 L stainless steel - Interior finish: Cold rolled - Exterior finish: Cold rolled - Temperature controlled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 Klsdpfxjv I A Nlo Ah Nel - 1 connection for level sensor BOTTOM - 2% sloped tray with drain - 1 total drain valve with cap APPENDICES - Tanks compatible and suitable for storing liquid fertiliser - 6-month warranty - Compliant with CE standards