GRECON DIMTER OptiCut S75-4

GreCon Opticut S75-4

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Maximum infeed length : 6300 mm ( Pusher ) Minimum cutting length : 50 mm Maximum cutting width : 360 x 30 mm / 240 x 160 mm Maximum feed speed : 60 mtr/min Main engine( Saw) : 7,5 Kw Sawblade diameter : 400 mm Year of construction: 2001 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Hsdpjyxwyrofx Aahep Machine measures : Infeed : L 7600 x B 800 x H 1100 mm / Sav : L 1400 x W 1200 x H 1650 mm / Outfeed : L 5200 x W 600 x H 900 mm. Overall working hight : 850 mm Defect Detection: Automated identification and elimination of wood defects (knots, cracks, etc.). Yield Optimization: Software-driven calculation to ensure the best possible use of the raw timber. Manual in English and German / Electric diagram included. Can be examined in working condition Request WHATSAPP video

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 (Söderhamn Eriksson) is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. The machine was not in operation and was in storage. Hedpfx Asyl Aqhoahsp

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt Hsdevvl H Nepfx Aahjp - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm Hodpfx Aajy Hl Iyohep - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Hodpfoyhckmox Aahjp Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure Hsdewvqklopfx Aahjp • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Hsdpfx Aaov Nhx Uohop Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw Hodpfxjw H Rq Hs Aahsp - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Hodpfx Ajvu Hgboahep Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: new, functionality: fully functional, power: 13.8 kW (18.76 HP), fuel type: diesel, color: yellow, overall weight: 1,588 kg, operation weight: 1,715 kg, Year of construction: 2026, Equipment: UVV, additional headlights, adjustable chassis, cabin, hydraulics, rubber tracks, Wacker Neuson ET 16 Mini Excavator – Edition A NEW Wacker Neuson Mini Excavator ET 16 – Edition A NEW | Operator’s Cab | Digging Depth 2,413 mm (long dipper arm) | Telescopic Undercarriage 990 mm | Flat-faced Couplers | Work Lights Front & Rear | Incl. Bucket Package & MS-01 Mechanical Quick Coupler Technical Specifications: Manufacturer: Wacker Neuson Model: ET 16 – Edition A Condition: NEW Cab: Operator’s cab Digging depth: 2,413 mm (long dipper arm) Undercarriage: Telescopic undercarriage – width 990 mm Couplers: Flat-faced couplers Lighting: Work lights front & rear Quick coupler: Mechanical MS-01 Bucket package: 300 mm & 500 mm trench buckets, 1,040 mm swivel bucket Highlights & Features: - Edition A – high-quality full equipment for professional use - Long dipper arm – digging depth 2,413 mm - Telescopic undercarriage – ideal for narrow access and high stability - Operator’s cab – comfortable operation in all weather conditions - Flat-faced couplers – fast & clean coupling - Working lights front & rear – optimal visibility for every job site Hsdszarbrjpfx Aahjp Fields of Application: ✓ Landscaping & gardening ✓ Cable & pipeline construction ✓ Fiber optic installation ✓ Construction & civil engineering companies ✓ Municipal use ✓ Agriculture & yard applications Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international on request Price ex warehouse Maassenstraße 91, D-46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further variants available! ➡️ New & used machines, attachments, and spare parts Buy Wacker Neuson Mini Excavator | ET 16 Edition A | Mini excavator with increased digging depth & telescopic undercarriage | Set incl. MS-01 & bucket package | Wacker Neuson quality Your reliable partner for construction machinery: Claudio Macagnino Baumaschinen & Commercial Vehicles Trading GmbH ➡️ Enquire now & secure immediately available new equipment! If required, we are happy to arrange a virtual inspection of the machine via video call.