Multi-spindle machine

GILDEMEISTER GM 20

Condition: used, TECHNICAL DETAILS - Spindle number : 6 - Max. bar diameter : 20 [mm], 25 [mm] in option - Cross slides number : 4 - Max. supply length : 100 [mm] - Spindle rotation speed : 420 - 5000 [Rpm] - Indexing time : 0,7 [s] - Machining time : 1,4 - 60 [s] - Power : 11 [kW] - Dimensions : 5800 x 1500 [mm] - Weight : 6000 [kg] EQUIPMENT - 4 cross slides posts 1 2 4 5 - 1 chip conveyor - 5 drillers Isdpfx Adjuharroksbd - 1 IEMCA PRA41/31/P feeder DBMS-36 (1995)

Condition: used, Technical details: drive motor: 4 kW Ibodou Nxrpopfx Adksd revolution per minute: 14 U/min voltage: 380 V / Hz weight: ca. 0,5 t Chip Crusher - Shredder 2-shaft crusher current feed size 400 x 360mm crushing tools 8 pieces per shaft current drop-out size L: 350 x W: 250mm gear motor manufacturer Vector accessories: 2 crusher discs *

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), Ibsdpfx Adoq Nzl Teksd main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC 2O14I68IUE STANDARD

Condition: new, Year of construction: 2024, Gildemeister 20ACN allows, again via SIEMENS operator panel, to set and change spindle rpm, cycle time and thread speed easily. It can machine workpieces up to 25 mm in size with equal ease and precision. It offers the possibility of mounting NC slides. Position 6 consists of: NC parting slide and NC take-up slide, NC take-up spindle with variable rpm, with synchronization and stop. The NC take-up spindle, specifically programmed, has the option of becoming a C-axis. Technical data: - Max. round bar diameter mm 20 / 25 - Max. square bar diameter mm 17 - Bar pusher mm 100 / 125 Ibedpfxsuqh Ihe Adkod - Front spindle stroke mm 86 - Longitudinal guide block stroke mm 50 - Radial slide stroke mm 42 / CNC 50 - Axial slide stroke mm 50 / CNC 56 - CNC cutting stroke mm 42 - CNC pickup slide stroke mm 42 - CNC Pickup Spindle Stroke mm 100 - Continuous spindle speed rpm rpm 420 - 5,000 - Rapid traverse times s 0.5 - 0.7 - Main drive power 11 kW / CNC 15 kW - Installation area without bar guide mm 4,000 x 1,900 - Net weight kg 5,500 The Gildemeister 20AC, on the other hand, is a multispindle lathe that targets highly specialized industries where precision and accuracy are imperative.

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Ibjdpfx Adet Hagnskod Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Iedpfxei Hb Szs Adkebd Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Machine equipped with Nakanishi tools for the dental sector that has always operated in oil – fire prevention system – Iemca Boss 338HD/32, new in 2015 – well tooled – Fanuc 32i-B Control. Iodpfx Ajw Ibpnedkobd

Condition: ready for operation (used), With hydraulic pump. Iodpfehw E D Sex Adkjbd

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle drive power: 7.5/5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle drive power: 5.5/3.7 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 8 - Travel X: 140 mm - Travel Z: 235 mm - Travel Y: 70 mm (+/-35 mm) - Driven tool speed: 5,000 rpm - Driven tool power: 1.0 kW LOWER TURRET HEAD - Number of positions: 6 - Travel X/Z: 140 / 310 mm ELECTRICAL SUPPLY - Total connected load: 30 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,220 x 1,460 mm Iedpow Igyrefx Adkebd - Machine height: 1,700 mm - Machine weight: 3,100 kg

Condition: used, Year of construction: 2015, Technical details: turning diameter: 20 mm Article: CNC automatic lathe Manufacturer: Tornos Type: Sigma 20/6 Year of construction: 2015 CNC axes: 6 Very good technical condition - used in current production Iedpfxotwgltj Adkjbd With barloader It has 6 numerically controlled axes, rotating tools that work together with both the main spindle and the counter spindle. Please, contact us for getting more information and pictures on mail(at) or *