Clamping cube 1500 x 1500 x 600mm

GERD WOLFF 1500 x 1500 x 600mm

Condition: new, plate width 1500 mm plate depth 1500 mm plate height 600 mm weight 2265 kg GERD WOLFF clamping cube 1500 x 1500 x 600 mm Also available in 800 mm version (H1154). If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 13 Edge distance: 120 Weight: 2265 kg Casting quality HT250 Flatness less than 0.12 mm Bodpfovu Hmnex Ab Tsdk Surface machined according to DIN 876/II Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. Bdodpfx Abev Rw Uuo Tok The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: new, plate width 1500 mm plate depth 1000 mm plate height 600 mm weight 2200 kg GERD WOLFF clamping cube 1500 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Bdsdpovn U Ugjfx Ab Tok Weight: 2200 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: excellent (used), Year of construction: 2014, turning length: 1,233 mm, turning diameter: 420 mm, MAZAK model QT SMART 350 M U1250 Year 2014 Mazatrol Smart control unit Max. Turning diameter 420 mm Max. Swing diameter 720 mm Max. Turning length 1,233 mm Bdedpfx Aborn Txkj Tek Spindle motor 30 kW Max. Spindle speed 3,300 rpm Full C-axis Max. Bar capacity 102 mm Spindle nose A2-11 12-station turret 12 stations for driven tools Driven tools 7.5 kW Max. Max. speed of driven tools 4,000 rpm Travels X-axis: 265 mm Z-axis: 1,233 mm Tailstock: 1,265 mm High pressure cooling 15 bar Tooleye Mayfran chip conveyor, ejection right 3-jaw chuck Kitagawa B210, diameter 254 mm Tailstock, MT5 Set of tool holders, 8 fixed holders + 2 attached tool holders Weight 7.200 kg LxWxH: 3,770x1,910x1,900 mm

Condition: used, Year of construction: 2025, faceplate diameter 1.250 mm swing diameter 1.600 mm turning height 1.400 mm Control Fanuc max. Torque 17.885 Nm cutting capacity max. 3.000 kgf max. workpiece weight 8.000 kg table: table diameter 1.250 mm table speeds 0,9 - 360 1/min power capacity - table 37/45 kW C - Axis: resolution 0,001 ° Working speed 0 - 1.200 °/min max. table speed 3,333 1/min turret slide: Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm axis stroke: x-axis 1.060 mm z-axis 900 mm cross rail adjustment 700 mm Tool-Presetter: tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 feeds: rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 80 kVA Bodpfevp Scqsx Ab Tsdk weight of the machine ca. 30,0 t dimensions of the machine ca. 7,00 x 6,00 x 4,70 m CNC - Vertical Turret Lathe HANKOOK - VTC 125 E - NEWMACHINE - price delivered, installed, commissioned in Germany / Europe

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: Bsdeuxfucspfx Ab Tjdk -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Year of construction: 1987, condition: excellent (used), machine/vehicle number: 31700987, Technical data Manufacturer: Stiefelmayer Type: SMM-C Year of construction: 1987 Measuring range X: 2500 mm Y: 1000mm Z: 1200mm Miscellaneous Measuring counter: MZ200 (retrofit in 2014) Column cross-section: 100 x 100 Cross section cross arm: 60 x 60 The machine can be upgraded with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! Bedpfx Abofd Dr He Todk (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Condition: used, Year of construction: 1985, working width: 500 mm cutter head: strip knive number of blades: 4 surface table length: 2700 mm adjustment surface table: Hebel read out: table height fence tilting: yes Bodjm H Uxrepfx Ab Todk motorpower: 4 kW motorbrake: yes, automatic machine length: 2800 mm machine width: 1000mm weight: 1050 kg

Condition: ready for operation (used), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Total height, working height: approx. 800 mm Weight: Bsdpfxogq Nawo Ab Tjdk

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Bdedpfx Aeuxqzujb Tjk Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).