Surface planer

Sicar FC500

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood Ljdpfxok H Ic Uj Ad Njhb RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Ledogzlpkspfx Ad Njhb Weight: 655kg

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Lhodjgr Udvepfx Ad Nob Machine width: 1000mm Weight: 870 kg

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Lsdpjd N Rb Dofx Ad Nshb Very good condition. Available immediately.

Condition: used, Wheel diameter: 500 mm Storage location: Nattheim Lhjdpfewl D S Usx Ad Njb

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW Lhodpfx Adjvkdqij Njb

Condition: new, Year of construction: 2022, Working width: 410 mm Planing shaft: strip knife Number of knives: 3 Dressing table length: 1800 mm Dressing fence angle adjustable: yes 45° to 90 Motor power: 4,4 kW Lhodpfxegzln Hj Ad Nob Motor brake: yes, automatic Suction connection: 100mm Machine length: 2000 mm Machine width: 750 mm Weight: 295kg

Year of construction: 2022, condition: new, Thickness planer KD410 Weight 205 kg Voltage: 400 V - 3 phases, power (S6) 4,4 kW / 6,6 PS chip and dust extraction diameter 100 mm Planing table dimensions 600 x 410 mm Maximum planing height 230 mm Shaft diameter 70 mm Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Speed 6 m / min. Accessories: - Handwheel with indicator for thickness planer - Planer cutterhead Tersa Location: Ex stock 54634 Bitburg - immediately available - Lhedpogx T Hhjfx Ad Neb

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, milling spindle length: 150 mm, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Lhedpfx Adswcpqqs Nsb Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. Ledpfx Ajuxqzuod Njhb The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).