Band saw

GEORGE CY300N

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Hodpfx Aeul Svljahop The machine is fully refurbished and tested.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension Hedpsxabpwefx Aahjp * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Cutting capacity up to approx. Ø 260 mm Robust cast construction Manual feed and hydraulic cutting cycle Swivel head for angular cuts Integrated coolant system Hodpfx Aaswbfhcjhop Ideal for workshops and industrial use

Condition: used, Plastic storage boxes / Euro containers 600 x 400 x 250 mm – approximately 20,000 units available Robust plastic storage boxes for warehousing, logistics, production, and shipping. Large quantities available. Ideal for automated storage technology, order picking, and internal transport. Manufacturer: Unknown Hjdpfx Aaszapqqshjp Product type: Plastic storage box / Euro container Material: Plastic Color: Gray External dimensions: approximately 600 x 400 x 240 mm Stackable: Yes Design: Closed side walls Base design: Closed Condition: Used Available quantity: approximately 20,000 units The boxes are only sold in truckloads; delivery is only possible in 33-unit pallets (36 per pallet), meaning a minimum of 33 x 36 = 1188 units.

Condition: good (used), Year of construction: 2017, machine/vehicle number: AGUA1710068, Offer 26101 Motorized tube sawing machine – tube beveling machine Hjdpfx Ajy A Hk Uoahop Technical data: - Cutting range: 29 - 119 mm - Wall thickness up to: 5 mm - 6 cutting speeds: 95 - 230 rpm - Central tube clamping via handwheel - Manual rotary drive / cutting drive - Height-adjustable saw unit - Drive: 220 V / 1200 W - Space requirement: appr. W 900 x H 1000 x D 400 mm - Weight: appr. 300 kg - 2 roller conveyors: 1500 mm

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm Hedpfxoxaarks Aahep capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 235° Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Capacity R 45°: 115° Hsdpfx Aaozc Imishjp Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Power: 1,5kW Length: 1930mm Width: 1610mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1999, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 / 305 mm capacity 45 degrees: flat 320 x 335 / 305 x 335 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 335 mm Hsdpsy Uy Svofx Aahsp saw band length 4400 x 34 x 1,1 mm Control SIEMENS speed 15 - 150 m/min work height max. 750 mm material layer max. 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1980 kg range L-W-H 2900 x 2350 x 1900 mm current new price approx. 80.000 euros special price on request - in checked conditions - machinevideo - ?v=_FF5YAF3AUs Equipment: - MEBA double mitre bandsaw - fully automatic - with electric miter adjustment via servo motor * Adjustment right up to 60° / left up to 45° - Material feed 0 - 600 mm // with multiple feed 0 - 9999 mm - Infinitely variable lowering speed 0-300 mm/min - Saw blade speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Material feed via servo-controlled ball screw drive - roller conveyor - operating instructions Special accessories included : - MEBA hydraulic bundle tensioning device

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Hodpfjwwr Tqjx Aahop Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Year of manufacture: 2020 Machine dimensions: 3045x2025x(H)2225mm Weight: 2800kg

Condition: used, Year of construction: 2008, Technical data: Design: Swivel frame design Mitre range: 60° left to 60° right Drive: 3 kW, 400 V / 50 Hz Saw band speed: continuously variable, 20–120 m/min Saw band dimensions: 4,780 × 34 × 1.1 mm Material support height: 750–760 mm Hodjzcdkkepfx Aahsp Minimum remaining piece length: 30 mm Hydraulic full-stroke clamping system Hydraulic saw feed Automatic cutting pressure control Carbide saw band guides Freely positionable control panel Weight: approx. 948 kg Machine dimensions (L × W × H): 2,355 × 810 × 1,410 mm Cutting range: 0° * Round: Ø 340 mm * Rectangle (horizontal): 510 × 220 mm * Rectangle (vertical): 510 × 220 mm * Square: 340 × 340 mm * 45° Right * Round: Ø 330 mm * Rectangle (horizontal): 360 × 120 mm * Rectangle (vertical): 300 × 340 mm * Square: 310 × 310 mm * 60° Right * Round: Ø 270 mm * Rectangle (horizontal): 230 × 160 mm * Rectangle (vertical): 200 × 340 mm * Square: 220 × 220 mm * 45° Left * Round: Ø 330 mm * Rectangle (horizontal): 370 × 130 mm * Rectangle (vertical): 310 × 340 mm * Square: 310 × 310 mm * 60° Left * Round: Ø 270 mm * Rectangle (horizontal): 240 × 160 mm * Rectangle (vertical): 210 × 340 mm * Square: 230 × 230 mm