Coolant Unit
FRASCARA PAPS 21/50

Name: FRASCARA PAPS 21/50
Brand: FRASCARA
Availability: InStock

Year of construction

2025

Condition

Used

Location

Germany

Machine data

Machine type:: Coolant Unit

Manufacturer:: FRASCARA

Model:: PAPS 21/50

Year of construction:: 2025

Condition:: used

Price & Location

Location:: , Germany

Call

Details about the offer

Listing ID:: A17960276

Reference number:: 1070-900126

Update:: 12.05.2025

Description

Technical details:

liter capacity: 21 l/min
Pressure of coolant: 50 bar
rated current: 20 A
Clean water tank capacity: 300 l
total power requirement: 16 kW
weight of the machine ca.: 200 Kg
dimensions of the machine ca.: 1,2 x 0,8 x 1,4 m

Isdpfx Agevfdmye Istg
We are importers for FRASCARA high pressure coolant systems
Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.
We can provide up to 3 pressure levels controlled by M-Functions.
Oil operated systems are available also.

Areas of application:
Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines

Function:
The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 bar pump.
When the filters are getting clogged, an alarm is triggered and the operator switches to the second filter bank. The first set of filters then can be cleaned while the system is in full operation. The filters are made of wire mesh and can be reused.
The system is very quiet and extremely reliable!

*

Seller

Registered since: 2005

24 listings online

Call

Send inquiry

Telephone & Fax

+49 7231 ... show

Fax:

These listings may also fit your interest.

Listing

Honing Machine - Internal - Vertical KADIA VZH 90/450 F

Metzingen

18,619 km

Honing Machine - Internal - Vertical
KADIAVZH 90/450 F

Call

Listing

2008 Deckel Maho DMC60U duoblock Deckel Maho DMC60U duoblock

Nördlingen

18,526 km

2008 Deckel Maho DMC60U duoblock
Deckel MahoDMC60U duoblock

Call

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Itjdpewglnyefx Ag Iog Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

See details

Listing

Korschenbroich

18,583 km

Toolholder
SAUTERVDI 20

€600

Fixed price plus VAT

Call

Year of construction: 1999, condition: used, ja VDI 20 Itodpfx Agohr Sv Te Ijg number 3 Stück im Paket +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

See details

Listing

Machining Center - Universal Deckel Maho DMC125 FD duoBLOCK

Nürnberg

18,455 km

Machining Center - Universal
Deckel MahoDMC125 FD duoBLOCK

Call

Condition: used, Year of construction: 2006, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B-axis (head) -10 - +180 x 0,001 ° C-axis (table) 360 x 0,001 ° feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Ijdpsyui Ncofx Ag Ietg Spindle new 10/2025 Turning-table overhaul 2022

See details

Listing

Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1600

Germany

18,510 km

Gear Hobbing Machine - Vertical
GLEASON- PFAUTERP 1600

Call

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa Ijdpfxjw Rrb Ho Ag Ietg weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

See details

Listing

Germany

18,384 km

Gear Shaping Machine
LIEBHERRWSC 1200

Call

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Iedswzmpzopfx Ag Istg Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

See details

Listing

Oftersheim

18,610 km

Electric forklift
STILLRX60-25

Call

Condition: used, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, Still RX60-25 electric forklift truck Year of construction 2017 Operating hours read approx. 5550 Overall height 2940mm Ijdpfx Agjv Hhcns Istg Lifting height 6000mm Triplex mast with free lift approx. 2200mm Fork length 1000mm Battery from 2017 Residual capacity 88% FEM 4.004 test new on sale The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

See details

Listing

Electric Forklift, E Forklift, 4 Wheel Forklift Heli Elektrostapler 4 Rad CPD 15

Hergensweiler

18,638 km

Electric Forklift, E Forklift, 4 Wheel Forklift
Heli Elektrostapler 4 RadCPD 15

€13,500

Fixed price plus VAT

Call

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Iedpfx Ajv A Rq Tsg Ijtg Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Length 2200mm Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg

See details

Listing

Gear Hobbing Machine - Vertical LIEBHERR LC180

Hilden

18,567 km

Gear Hobbing Machine - Vertical
LIEBHERRLC180

Call

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm Itedpoymf Daefx Ag Isg table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

See details

Listing

Unterschleißheim

18,484 km

Machining Center - Universal
Deckel MahoDMC125 FD duoBLOCK

Call

Condition: used, Year of construction: 2007, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Ijdpfey E Tvisx Ag Ijtg Control SIN840D pl C-axis (table) 360 x 0,001 ° B-axis (head) -10 - 180 x 0,001 ° rotary table speeds infinitely variable 10 - 500 U/min feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless programmable 20 - 8.000 1/min spindle turning speed - gearbox stage 1 20 - 1.600 1/min. spindle turning speed - gearbox stage 2 1.600 - 8.000 1/min. power capacity at 100 % load 19,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 772 / 492 Nm table surface area Ø1.100 mm table load 1,50 t tool magazine with 180 tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg total power requirement 85,00 kW weight of the machine ca. 32,50 t dimensions of the machine ca. 9,50 x 4,80 x H3,80m m 5-axis machining center with turning function and pallett changer. Control SIEMENS SINUMERIK 840D powerline, Operating Mode 4, Tool-Magazin with 180 places, coolant filter system 980 liter, chip conveyor, coolant through the spindle, RotoClear.

See details

Advertise here

Coolant UnitFRASCARA PAPS 21/50

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Coolant Unit
FRASCARA PAPS 21/50