Edge banding machine

Format4 45.03 LX

Condition: excellent (used), Year of construction: 2019, operating hours: 4,650 h, functionality: fully functional, edge thickness (max.): 3 mm, product height (max.): 45 mm, product height (min.): 10 mm, product length (min.): 140 mm, product width (min.): 70 mm, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Motorized corner rounding unit Kodpfx Aswwq Dzsg Aedw Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: like new (used), Year of construction: 2021, operating hours: 15 h, Edge banding machine FORMAT 4 Tempora F600 / 60.06 ELX - as new Kdedpfxjwq A Ewj Ag Aow - only used briefly and now for sale due to production closure - immediately available

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness: 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized, adjustable infeed fence Pre-milling unit for processing before glue application station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-down devices GLU-JET automatic gluing unit. Cartridge + PUR bonding. Thin-film technology Adhesive height adjustment / contact nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatic rollers. NC servo axis Kjdsxnmu Ijpfx Ag Aodw End trimming unit for coils and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° bevel Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1, 3; R2 (2x) Bevel milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling top and bottom longitudinal edges and copy milling of the front and rear vertical end edges. Working height 60 mm. Radius R1, 3; R2 (2x); bevel 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); 45° bevel Nesting package Surface scraper unit with pre and post sensor Demand-controlled, oscillating buffing unit for final cleaning and edge polishing with 2 textile wheels Spraying equipment at infeed and outfeed, as well as antistatic agent at the pressure unit Infeed area with electronically controlled separating agent spraying device Pressure unit with electronically controlled antistatic agent spraying device Outfeed area with electronically controlled cleaning agent spraying device including cleaning agent Automatic chain lubrication Barcode scanner MACHINE IS FACTORY SERVICED AND IN TOP CONDITION Year of manufacture: 2021 / Leasing options available Machine is connected and ready for demonstration at the exhibition center Available from stock Lieboch

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ksdevvkfdopfx Ag Aedw

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang Kdodpfx Agjxfh Tms Ajw HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Ksdpsw Igg Ssfx Ag Asdw Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Kjdpfoxducrox Ag Aedw Please feel free to contact us if you have any questions.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Kdodpfsv Aywpex Ag Aew

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam Kdjdpsw Nadtofx Ag Asw - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Kjdew I U Rfjpfx Ag Aedw Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim