Power chuck & zylinder & Tube

FORKARDT 3KTNCV-200-45

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: +20 -50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm Hfjdpfx Asxppnmsa Esi ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures. Hedpfx Aoxf Iamja Ejfi

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper Hsdpfx Aaslz Rvle Eefi 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Hedpfxjwqb Scj Aa Eofi Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Year of construction: 1993, condition: used, Name: Industrial decanter Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year built: 1993 Max. bowl speed: 3250 1 / rpm Material: Edelstahl Stainless Steel Driving force: 18,5 / 21 kW Inner diameter drum: 353 / 198 Interior drum length: 1200 mm Permissible sediment density: 1,2 kg / dm3 Dimensions: Length 3000 x width 1000 x height 1150 mm Empty weight: 2500 kg Technical doc.: Yes Hjdpfx Aswid Nhea Ejfi Message: Eddy current brake Accessories: A control cabinet Condition: Second hand Price: On demand

Condition: used, System: Decanter Hodpfevz Rwksx Aa Eofi Type: Alfa Laval DSNX 4250 Year of manufacture: 1995 Speed: 2950 rpm Gearbox: 2.71 Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Hfsdpfx Aajuz If Ne Eei Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor Hjdpshkkwbjfx Aa Ejfi 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm Hsdpfswwl I Isx Aa Eofi total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. The super compact machine is targeted to users who do not require a CNC control unit, but still set the highest requirements for machining quality. The machine is easy to operate and access, which allows for fast machine tooling. TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece lenght: max. 400 mm Center height: 100 mm Workpiece weight: 30 kg Workpiece headstock - socket: MK4 Tailstock - socket: MK3 Grinding wheel diameter: max. max. 350 mm Hfedpfx Aastmqcwj Eei Price, delivery time and equipment of the machine according to agreement.