Hydraulic unit

FMA H126-100-20

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min Prodjupw Uzspfx Adnjd 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Pjdpfx Adju Dm E Honerd Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Pjdpfx Adju St S Asnord Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Year of construction: 1976, condition: ready for operation (used), machine/vehicle number: 12321, Hydraulic unit, consisting of an oil tank with a drive motor mounted on it with a flanged hydraulic pump and 2 valve blocks above it 1. valve block: Operating pressure 160 bar Delivery rate 20 l / min Pedpfxoghgtro Adnjrd 2. valve block: Operating pressure 319 bar Drive motor KATT: 220/380 V, 1420 rpm, 2.2 kW Required space: 700 x 620 x 1050 mm Weight: including hydraulic oil (90 l) 193 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, hydraulic pump Pededwc I Rjpfx Adnjrd -for: Harbs ZSMV/2 pivot beater -Max. Pressure: 70 bars -Motor: 1.5 kW 1405 rpm -Number: 1x available -Dimensions: 465/260/H520 mm -Weight: 58kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Hydraulic unit: comes from a TRUMPF punch type Sunimat 400 -Motor: 2.2 kW 1440 rpm -Max. Pressure: 45-180 bar -Max. Liter output: 2.1-11.8 l/min -Hydraulic tank: 120 liters Prsdpfodq U S Hex Adnsd -Pressure relief valve: 1 -different valves: -Pressure accumulator: -Dimensions: 660/520/H1000 mm -Weight: 264 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack Predpfxsf Atrvo Adned -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg

Condition: excellent (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 320 mm, overall weight: 860 kg, Ruhla Type 58 Universal Toolroom Milling Machine Thiel Duplex 58 like Deckel FP1 Compact machine with drilling spindle and automatic feed in all 3 axes includes vice New digital display with 1 measuring rod included Swivel table +/- 0-30° Table 715 x 260mm Pjdpfxswf Agds Adnjrd X 300mm Y 160mm Z 320mm Dimensions (LxDxH) approx. 110 x 110 x 170cm Inspection and testing are welcome

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, hydraulic pump A10 TGL 10859 -Motor: 2x 0.55 kW 1360 rpm -Pressure: nominal pressure 16 MPa / 160 bar max pressure 200 bar -Flow rate: total approx. 12 l/min (2 x 6 l/min) -Hydraulic tank: with indicator -Individual components: see photos Podpfx Asigrwisdnord -Number: 2x aggregate available -Price per piece -Dimensions: 735/510/H1395 mm -Weight: 112 kg/pc.

Condition: used, Hydraulic pump, high pressure pump Pjdpob A Ibdsfx Adnerd -Max. Pressure: 500 bar -Hydraulic connections: 7 -Pressure clock up to: 600 bar -Pressure: can be switched on/off via foot switch -Print: mechanically adjustable -Motor power: 0.15 kW 1370 rpm