Horizontal Turning Machine

FAT TUR SMN 710

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t Lrjdpfx Asugawfsdkew dimensions of the machine ca. m

Condition: new, The RSM 500 A, a powerful Conventional Cylindrical Grinder from KNUTH, is built to deliver exceptional grinding performance with its robust design and excellent rigidity. Featuring a premium cast-iron machine frame, this grinder ensures optimal conditions for achieving superior grinding results. The machine is equipped with finely adjustable hydraulic feeds that operate smoothly in the longitudinal direction, and a swiveling table allows for precise taper grinding. With a maximum grinding diameter of 200 mm and a grinding length of 500 mm, it caters to a variety of applications. The headstock can rotate 180 degrees for internal grinding, while the hydraulic tailstock, with foot switch operation, enhances efficiency during setup and workpiece exchanges. Standard equipment includes a 2-axis position indicator, internal grinding equipment, and a comprehensive accessory package. Invest in reliability and precision for your grinding needs—request a quote for the RSM 500 A today, a leading choice in the Conventional Cylindrical Grinder category within the Grinding Machines sector. Lodpfx Asncdx Nedkjrw

Condition: excellent (used), Year of construction: 2006, CNC cycle lathe WEILER E 50, year 2006 Lrodpfxoxd Diuj Adkew WEILER cycle control D3 Chuck 250 mm SCHUNK ROTA-S 250-62 Parat tool holder size 3 with 4 tool pockets Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle bore: 83 mm Centre distance: 1000 mm Turning length: 1100 mm Spindle speeds: 1-2500 rpm / Motor: 20 kW For all further details, refer to the data sheets. Machine documentation and data backups available, machine under power and ready for demonstration.

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm Ljdpswmcx Ajfx Adkjrw turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. *

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Lodpfsxgdfbex Adkjrw Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: good (used), Year of construction: 1999, Center height 550 mm Turning diameter over bed 1100 mm Turning diameter over support 830 mm Center distance 2000 mm Spindle bore 95 mm Spindle mount DIN 55027 size 11 Bed width 700 mm 21 speed settings 8 – 800 rpm Workpiece weight between centers 6000 kg Workpiece weight between centers and 1 steady rest 7600 kg Workpiece weight in 3-jaw chuck 1000 kg Feed range longitudinal 0.010 – 12.8 mm/rev transverse 0.05 – 6.4 mm/rev Rapid traverse Z/X 4/2 m/min 60 metric threads 1 – 120 mm 56 inch threads 30 – 1/4" 45 module threads 30 – 0.25 module Tailstock mount MT 6 Quill travel 300 mm Quill diameter 130 mm Drive power 27/17 kW Dimensions L x W x H 4500 x 1750 x 1700 mm Weight 7800 kg Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN Lsdpfx Adev Rvztjkorw • 3-jaw BISON face-to-face scroll chuck, Ø 630 mm • 1 stationary steady rest with rollers up to Ø 750 mm • Automatic top support feed • "Multifix" quick-change system, size D2 • Main drive 27/17 kW • Tailstock quill with reduction gear for quill adjustment 1:1 + 1:5 • Large, movable chuck guard • Leadscrew and feed screw guards • Machine light • Feed + rapid traverse in all axes • Coolant system • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1986, grinding diameter 350 mm grinding length 600 mm centre height 175 mm Very well maintained machine. The machine comes from a precision grinding shop from the Black Forest. Can still be viewed under power for a short time at the seller's premises. In 2022, the machine was partially overhauled and serviced in-house with production of the geometry according to the manufacturer's protocol. Lrsdpfxev Tqqnj Adkew Equipment: -2-axis digital readout FAGOR -sine bar -tailstock with fine adjustment -Hydraulic tailstock -Surface grinding device -Internal grinding device -Fischer UJ70 internal grinding spindle -Paper belt filter -automatic sequence: roughing-finishing-firing-retur Translated with (free version)

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard Ljdpfxjfg E Hze Adkerw equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm Ljdpjw Dvkaofx Adkerw --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each Lrsdoqx Sz Depfx Adkjw All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp