Band saw

Eumacop ER 500

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm, band guidance above and below, tiltable table Storage location: Supplier Bcsdpfx Aasw D Aw Hjfou

Condition: new, ELMAG STBS-500 masonry band saw STBS for dry cutting (bricks, aerated concrete, insulating material) The STBS series masonry band saws are specially designed for use designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Bodpfx Ast Egfzeafjcu Short saw blade change times Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Condition: new, Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Total power (kW) 4.5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Bodpfxet Eaw Ds Aafecu Weight (kg) 250

Condition: new, Technical data: Minimum cutting width: 300 mm Max cutting width: 400mm Max cutting height with standard blade guide: 350 mm Max cutting height with special blade guide: 410 mm Belt length: 2720 mm Motor power: 1.1 kW Advantages: -They are safe and easy to use machines, manually operated by the operator. -Designed and built to cut materials such as: solid wood, panels, plywood boards, also laminated or edged -They are suitable for both small jobs and mass production Bcsdpfxjmiikte Aafou -The main advantage that distinguishes MD Dario band saws from conventional models is the articulated arm with a special system of joints that allow the machine to rotate freely in all directions and angles, thanks to which the user can make precise cuts - The saws have 3 rubber-coated flywheels, thanks to which it is possible to perfectly guide the saw and use band blades of different sizes depending on the type of cut Work table and tilt included.

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Bodpfxek H Ic Ue Aafocu Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Max. swing dia. over bed 356 mm Max. swind dia. without swivel bed bridge 506 mm Center height 180 mm Max turning diameter over cross slide 220 mm Max. turning length 1000 mm Spindle face D1-4/DIN55029 Spindle bore 38 mm Threads that can be cut Metric, Withworth, Module, Bedpoxbz Ebsfx Aafecu Spindle speed 45 – 1800 rpm Tailstock taper Morse 3 Tailstock sleeve travel 120 mm Motor power 2.4 kW Machine weight 900 kg Machine dimensions 1945 x 785 x 1204 mm Accessories - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - Face plate D320 mm - 3 axis DRO - Electromechanical spindle brake - Steady and travelling rests - Center - Coolant unit - Halogen work lamp - Splash guard - Chuck protection - Tool post protection - Manual Brand new center lathe with zero working hours. Showroom model.

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm Bcodpfxow En D Ij Aafou throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Description to follow!

Condition: excellent (used), Year of construction: 2014, Datron M8 Cube with rotary swivel table (4th + 5th axis) HSC Pro control V9 Year of manufacture: 2014 Machine operating hours: approx. 8,800 hours 2kW HF spindle, 6,000 rpm up to 60,000 rpm with direct shank tool clamping system HIB HF spindle cooling unit 15-position automatic tool changer 3D probe Renishaw Precision tool length probe Microjet minimum quantity lubrication system with 4-nozzle spray unit Vacuum table with 500mm x 500mm working area 1 x T-slot plate Bcedpjx Rpl Djfx Aafou 1 x short-stroke clamp 3-fold vacuum distributor The machine is in very good condition. The machine can also be purchased without the rotary swivel table (4th + 5th axis).

Condition: used, Year of construction: 1966, Used machine Year of manufacture: 1966 Equipment and technical data: Bcsdpfx Ajxwz Rvsafeu - Roller diameter: 500 mm - Saw blade length: 4080 mm - Saw blade thickness: 0.5 mm - Motor power: 3 HP - Rated voltage: 380 / 220 V - Rated current: 5.8 / 10 A Availability: approx. end of January 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, milling spindle length: 150 mm, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Bedpfx Aswcpqqeafjcu Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length