PCB REFLOW OVEN

ERSA 3/14

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Lodetvau Aopfx Afterp Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust Lrodpfx Ajif Ek Roftjp • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2014, condition: good (used), Machine in operational condition with following specification: Dual-stage 2 x HM Head 2 x ScanCamera 2 x MultiCamera 2 x Nozzle Station Ledpfx Afevfpmleterp 4 x FES32 Traceability package Ask for additional information!

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Lrjdsw R Sknepfx Aftsp Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Lodpfx Aow A H T Aoftsrp Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: good (used), Pancake machine with electrical control panel, outlet conveyor and 9 heating plates. Manufacture - S.A BALPE. Type - 9.P1.20. 380v. + N. 50Hz. 16kW. Diameter of heating plate - 20cm. Width of outlet conveyor - 20cm. Kapacitet ca. 50/min Ledpoihh H Dsfx Aftjrp

Condition: used, Year of construction: 1983, grinding length 8400 mm Ledpfjvr Hgvox Aftorp grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: excellent (used), Year of construction: 2009, operating hours: 8,303 h, functionality: fully functional, machine/vehicle number: 33365B, color channels: 5, paper weight (max.): 600 g/m², paper width (min.): 180 mm, paper width (max.): 520 mm, paper height (min.): 148 mm, paper height (max.): 360 mm, counter reading (color): 13,733,163, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, MAN Roland 50-5 HiPrint five-colour B3 sheetfed offset press, manufactured in 2009. The press is equipped with a control console, connected densitometer and CIP3 system, including the required hardware keys. This configuration offers efficient colour pre-setting and colour control, making the machine suitable for high-quality commercial printing, brochures, leaflets, labels, packaging-related work, and demanding short- and medium-run offset production. The machine has a low total sheet count for its age: approximately 13.7 million impressions. Main technical data: Max. sheet size: 360 × 520 mm Min. sheet size: 148 × 180 mm Max. image area: 350 × 515 mm Printing plate size: 459 × 525 mm Blanket size: 530 × 540 mm Stock thickness: 0.04 – 0.8 mm Printing start: 52 mm Max. speed: 13,000 sheets/hour Frequency: 50 Hz Software language: German Equipment and extras: ProfitPlus Comfort Electronic double-sheet detection Ultrasound double-sheet control at the feeder Blanket washing device with cloth / indirect washing Automatic ink roller wash-up device ATwash cloth system Dosing unit alpha.d Lredpfxezbynco Aftsp Alcosmart alcohol stabilizer Additive dosing unit Carton guide complete with vacuum feed board EPL semi-automatic plate change system Venturi Air Transfer system Technotrans cooling and circulation system with automix device Weko T6 / Grafix 72 Digital Plus powder sprayer Grapho-Metronic register system PQC Plate thickness: 0.15 mm Special value-enhancing extras: manroland control console with monitor and ink-key control CIP3 system with hardware keys Connected densitometer for precise colour control Double-diameter impression cylinders High impression force, suitable for thicker stock and carton work Documentation, installation CDs, spare parts and tools included Counters: Total impressions: approx. 14 million Operating hours: approx. 8,363 hours Inspection and service: The machine has been inspected by Man Roland service in Hungary. It is currently installed in our printing house and can be inspected by appointment in Budapest, Hungary. Advantages and applications: The press is suitable for high-quality commercial printing, brochures, leaflets, labels, forms, packaging-related work and other demanding offset printing applications. Thanks to the double-diameter impression cylinders and high impression force, the machine is also suitable for thicker stock and carton printing up to 0.8 mm. Condition: used, installed, available for inspection Location: Budapest, Hungary Terms: ex works Budapest

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Lodon Htktjpfx Aftsrp

Condition: good (used), Year of construction: 2014, DIP TECH GlassJet NOVO digital printer: Print resolution: 720 dpi Ink color: black, similar to etching, white and other spot colors Maximum glass size: 2200x1200 mm (width x height) Minimum glass size: 400 x 400 mm Glass thickness: 2-19mm Print speed: up to 30 m2/h (in the context of 8 print heads for one color) Number of required operators: one Lrodpfx Aoiukuueftop Overall dimensions: 2,500 x 4,700 x 2,000 mm (width x length x height) Image format: All common image file formats including: PDF, PS, EPS, TIff, BMP, JPEG Ambient temperature 18-25 degrees Celsius Power supply: Single-phase 400VAC x 16A 50/60 Hz