Automation

EROWA RoboSpa 3.0

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min Iedpfed Izmaox Abxetg sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks! Iodpfx Absyk R Dyexstg

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Itsdpfjx D I A Sox Abxsg Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Iodjw U Uh Djpfx Abxetg Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Itodjvygwwopfx Abxeg Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), 5-axis Year of production: 2018 Itjdpoun Rqgofx Abxeg Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Iedpfx Aoyhb D Esbxjtg

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Itsdpfexl R Hvox Abxsg Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Itsdpfjv Hxbbex Abxog

Condition: new, Year of construction: 2026, A 220-liter top-loading sandblaster with telescopic cylinders is a device for sandblasting and cleaning surfaces from rust, paint, greasy deposits and other impurities. The top opening significantly improves the ergonomics of working with heavy details. It is standardly equipped with a set of nozzles, a gun and glass protection stickers. A sandblaster is an essential tool in the metal, automotive, construction and shipbuilding industries. Thanks to its capacity and the stream of sand to the type of surface, the sandblaster ensures quick and effective cleaning of surfaces. The KDP220TOP sandblaster is a top quality product. It provides users with long and reliable work, and what is more, it enables quick and effective cleaning of surfaces of various types of elements. Equipped with an upper opening on telescopic actuators, it significantly improves work ergonomics and makes it easier to load heavy elements, and the capacity of 220 liters enables effective cleaning of larger surfaces in a short time. Advantages of our sandblaster model Complete for immediate use Convenient sandblasting gun with 4 replaceable ceramic nozzles Large, stable front door with rubber seal around the perimeter for safe and dust-free operation Telescopic actuators for increased work comfort High-quality rubber gloves integrated with the device Vent connection Efficient lighting of the workspace 4 pieces of replaceable protective film for the window, visor Sand blasting hose placed at the bottom of the collection container Adapted to work with various abrasives Drain hole allows for quick change of blasting material Ease of use, reliability and work safety Technical parameters Technical parameters of KDP220TOP AIR REQUIREMENTS 400-700 L/min ALLOWABLE PRESSURE 8 BAR AIR CONNECTION 1/4" quick connector ABRASIVE TANK CAPACITY +/- 18kg SUCTION CONNECTION (venting) 63mm VIEWFINDER AREA 540x250mm FRONT HEIGHT 370mm INTERIOR CABIN DIMENSIONS (LxWxH min-max) 840x550x370-550mm EXTERNAL DIMENSIONS OF THE CABIN (LxWxH min-max) 890x560x1118-1380 mm WEIGHT 49kg Technical parameters Technical parameters of the extraction unit MODEL DC23 TENSION 220V POWER 1200W UNDERPRESSURE >12Kpa INPUT DIAMETER 45mm CAPACITY ~16l Standard equipment Work area lighting - 12 V fluorescent lamp with 230 V power supply with switch Ijdpsvzqf Usfx Abxjtg 2 high-quality rubber work gloves, integrated with the device 2 suction (venting) connections with a diameter of 63 mm and 90 mm, enabling the connection of a suction device Sandblasting gun with 4 replaceable ceramic nozzles in sizes: 4, 5, 6, 7 mm 4 pcs. of replaceable protective film for window, visor Upper door with rubber seals around the perimeter to ensure dust-free operation Stable grid on the processing field Instructions in Polish Dust Extractor DC23 Connecting hose approx. 2m Bag filter We kindly inform you that the device requires self-assembly. Manufacturer: Cormak