Tap (27958)

Emuge Franken M 80 x 3

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine Nledpfx Afed S Uf Seaja KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Year of construction: 2002, condition: good (used), functionality: fully functional, Drum dryer for wood sawdust and chips with capacity up to 15t/h. Condition - fully functional. Nledpfx Afjvx S Hnjaoa

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm Nlsdpju At Thefx Afaea - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Nsdpfowt Swzox Afaela

Condition: used, Year of construction: 2023, operating hours: 697 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 697, First registration: 19.12.2024_____First registration: 19.12.2024, Operating hours: approx. 650. Standard equipment/Technical data ENGINE Max. output: 224/305 kW/hp (ISO 14396) Max. torque: 1280 Nm. 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V. Emission standard (DOC+SC+SCR) without EGR, Stage V. Electronic engine management with Vistronic fan control. Engine speed memory. Powercore engine air filter with coarse dirt extraction. EasyCare cooling package. Additional pre-fuel filter with water separator. 500 litre fuel tank. Nledpfx Aew E N Tdefaoa

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 32 mm throat 280 mm Nledjxqrd Hepfx Afaoa bore stroke 110 mm spindle taper MT 3 table-size 340 x 400 mm turning speeds 210- 2600 U/min total power requirement 1,8 kW weight of the machine ca. 325 kg dimensions of the machine ca. 950 x 450 x 1750 mm

Condition: good (used), Year of construction: 2024, machine/vehicle number: 20660471, Offer 24143 Nedpfx Ajtx T Anofaola Technical data: - Vertical version - Max. operating pressure 15 bar - Fully galvanized pressure tank / boiler - Pressure tank capacity 270 l - Suction volume 500 l/min - Delivery volume 470 l/min - Compressor speed 940 rpm - Cylinder stages 2 - 2 - Drive 400 V / 4.0 kW - Pressure gauge - 3 swing feet - Boiler diameter approx. 600 mm - Space requirement approx. W 800 x H 1850 x D 800 mm - Weight approx. 240 kg

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm Nlsdpspxmliefx Afaoa end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 155 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 125 - 3030 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,2 kW weight of the machine ca. 540 kg. range L-W-H 0,8 x 0,55 x 2,2 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed Njdpsurznqofx Afasla • electric drive for table height adjustment

Condition: good (used), FLOTT E-3 pillar drill Nledpfx Afsric Tboaja throat 260 mm Bore 125 mm stroke Speed: 125 -2500 Clamping table diameter 420x340 mm Column diameter 110 mm Tool holder MK3