Vertical turning center

EMAG VSC 250

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Itsdpfoxl Ah Sjx Afijn

Condition: good (used), Year of construction: 2002, Machine type: CNC Lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading Itedekyrwwspfx Afion

Condition: used, Year of construction: 2001, Offered is a vertical single spindle pick up turning machine EMAG VSC 250 built 2001. The machine is equipped with a conveyor belt (O-Type) that runs through the machine. The automation belt is loaded with workpieces at the front of the machine. The work area has one working spindle and one turret with 12 tool positions. Other accessories such as a chip conveyor, coolant equipment or independent extractor unit are not included in the advertisement. Iedpetrwdtjfx Afistn The machine was taken out of service a few years ago. After inspection, the VSC 250 is fully functional and in good condition, as can be seen in the pictures. The machine has been completely cleaned and repainted. All control cabinet components and cables are still in their original condition. COTROL Siemens Powerline TECHNICAL DATA workpiece diameter: max. 200 mm workpiece height: max. 150 mm swing diameter: 250 mm X-stroke: 685 mm Z-stroke: 200 mm MAIN SPINDLE power: 28 kW speed: max. 6000 rpm TOOL CARRIER 1x disc turrets, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time of the machine on request.

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, Equipment: rotational speed infinitely variable, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER EMAG - REINECKER VSC 250 DS Used, year of manufacture 2015 Control system: Siemens 840 DS Condition: Used machine, in good condition Machine operating hours (approx.): 35,000 Program run hours (approx.): 22,000 Operating voltage 400V Air connection 6 bar Total power requirement approx. 45 kVA Chiller water/water Machine dimensions without peripherals (L x W x H) approx. 3200x1900x2650 mm CYLINDRICAL GRINDING Integrated motor grinding spindle, max. speed 45,000 rpm and max. power 18 kW Touch dressing for ceramic CBN grinding wheels Vertical CNC turning and grinding center Automation / Gantry: EKF basket stacking cell as raw/finished parts storage for baskets 400x600 mm on floor trolleys 3 basket stacks for uninterrupted operation even during basket changeover, loading/unloading via loading gantry The machine is in well-maintained condition and has been serviced by EMAG. The production process includes pre- and finish machining of the bore/face surfaces by hard turning the face surfaces as well as the diameter/bore, followed by internal cylindrical grinding. Ijdpfolfduiox Afistn We have described the details relevant to the system as accurately as possible. An inspection under power is possible by prior appointment. Dismantling and loading of the equipment must be carried out by the buyer. Price and further details on request / special price All technical data subject to errors/typos. Sale only within EU countries

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Ijdpfx Afjia Rtdjiotn Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2014, condition: like new (used), machine/vehicle number: 105488, Technical data: Iedpfxefyaaij Afietn Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: X-axis:745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) s 4 - 6 Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Speed: max. 6000 min Turret swivel time: 0.3 s Control: Bosch Rexroth MTX

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm Iedot Hxa Tspfx Afietn control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-belt) Itodpfx Aew Dyqdsfijn - Pneumatically operated transfer unit - Stamping unit - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, workpiece diameter (max.): 200 mm, workpiece height (max.): 150 mm, turning diameter over bed slide: 250 mm, The machine has been fully cleaned and newly painted! TECHNICAL DETAILS Machining Area Workpiece diameter: max. 200 mm Workpiece height: max. 150 mm Swing diameter: 250 mm Axes X-axis travel: 685 mm Z-axis travel: 200 mm Main Spindle Main spindle power: 28 kW Main spindle speed: max. 6,000 rpm MACHINE DETAILS Isdpfx Asw Hzupsfiotn Control: Siemens Powerline EQUIPMENT Round belt 1x disc turret, 12x D40

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 105488, Technical data: Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: Itedpswfgzljfx Afien X-axis:745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) s 4 - 6 Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Speed: max. 6000 min Turret swivel time: 0.3 s Control: Bosch Rexroth MTX