Various machines

ELMA S130 H ELMASONIC

Condition: new, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control Fgodpfxehc Uvms Alqob - Emergency stop - documentation - 400V

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs Fgedpfsydaadjx Alqsb X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Fgjdpowty H Dsfx Alqeb Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Fgedpjrpn Dvefx Alqjb

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE Fgedpfx Aleywv Tnoqob • Electrical: 440 V, 3 phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power on time: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, wash gun, LED work light, fully enclosed working area • Condition: very good condition, low operating hours, well maintained Additional equipment • Machine vise • Touch probe Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Fedpfx Aowg Takolqogb Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Fgedpfxsv Nztxo Alqjb Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets Fgodpsxxm Hfofx Alqeb 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Fsdsftzgxepfx Alqogb Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us.

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical data: - max. grinding length approx. 350 mm - max. grinding width 150 mm - max. installation height with / without magnet 150 / 210 mm - grinding wheel stroke approx. 200 mm - clamping surface 300 x 160 mm - magnetic clamping plate 250 x 150 mm Fgodpfxsklxwks Alqob - grinding wheel dimension approx. 200 x 80 x 78 mm - grinding wheel speed 2800 rpm - swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - wet grinding device - drive 400 V / 1,85 kW - space requirement approx. W 850 x H 1650 x D 800 mm - weight approx. 350 kg