Ice press mold

Edelstahl Formgeber: Spaghetti und breite Nudel

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Cgjdpevf E Avefx Akbeu Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Canon imagePRESS C9010 VP’ Object of sale: 1 x Canon imagePRESS C9010 VP with the following equipment: incl. Prisma Controller or Fiery incl. booklet finisher N2 incl. High Capacity Stacker H-1 incl. POD Deck D1 Counter readings: Total: Approx. 1,880,920 pages Codeu Ecl Espfx Akbogu Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information you can of course also contact us personally.

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction Cgodpfxsvu U Its Akbju (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Cgedpjygw E Njfx Akbju Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side Cgsdpsm E I D Hjfx Akbeu loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° - n = 5,300 rpm - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: Cjdpfjx Enpqex Akbsgu - 18-position carousel magazine - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 380 mm, spindle motor power: 15,000 W, overall weight: 8,000 kg, controller manufacturer: MITSUBISHI, controller model: M730VS, number of axes: 8, This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of Ø 51 mm and a spindle speed of 5,000 min-1. The machine includes 12 turret stations and a slide stroke of 195 mm in the X1 direction. If you are looking to get high-quality turning capabilities, consider the Citizen BNE-51MSY horizontal turning machine we have for sale. Contact us for further details. • Maximum Bar Diameter (SP1): Ø 51 mm • Maximum Bar Diameter (SP2): Ø 51 mm • Spindle Speed (SP1/SP2): 5,000 min-1 • Spindle Motor (SP1): 15/11 kW (15min./cont) • Spindle Motor (SP2): 7.5/5.5 kW (15min./cont) • Turret Stations: 12 ST. (HD1) / 12 ST. (HD2) • Revolving Tool Motor: 2.2 kW • Revolving Tool Torque: 20 Nm • Revolving Tool Speed: Max. 6,000 min-1 • Slide Stroke (X1/Z1): 195 mm / 380 mm • Slide Stroke (X2/Z2): 195 mm / 175 mm • Slide Stroke (Y1): 80 (± 40) mm • Slide Stroke (B): 450 mm • Rapid Feed Rate (X1/Z1): 18 m/min / 20 m/min • Rapid Feed Rate (Y1): 12 m/min • Power Supply Capacity: 44 KVA • Voltage: AC 200/220 V • Coolant Tank Capacity: 350 L Codpfx Asywy Shjkbegu Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. booklet finisher incl. Squarefold + Fronttrimmer Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 2,573,792 pages Colour: Approx. 2,368,409 pages Black: Approx. 205,383 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Codpfxovtpnlj Akbsgu Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Codpfxsiz Tzxj Akbjgu Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Cjdex D N Ipjpfx Akbjgu Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Pinol way 870 mm Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning