Face plate 28035

Durchmesser 540 mm Gewinde : M120 x 6

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Rjdpjh Hm Thofx Aa Dst Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Rodpfjfx Ibnox Aa Dot MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Max module: 12 Min module: 3

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High performance - bench tapping machines on T-slot plate Technical data: - Tapping capacity approx. M 3 - M 16 Rodef Tcy Dspfx Aa Det - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer - mobile underframe - space requirement approx. W 2400 x H 2000 x D 1000 mm - weight approx. 1100 kg

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet Rsdpfx Aaswtctyj Dot *

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja Redpfx Aefym Huja Djt 2.000 mm weight of the machine ca. 790 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts from MORI SEIKI VL250 Bj.2000 1.turret(not complete) Ball screw with nut X and Z axis X and Z axis guides parts are from new machine Motor X-axis See photos. Rjdpfx Aajcbinns Dst

Condition: used, machine/vehicle number: 1725, sloping angle: 30 ° max. sloping width (at 40 kg solidity): 13 mm Rjdpfs N E Tmjx Aa Dst electrical connection: 380 V kW space needed: 820 x 850 x 1380 mm weight: 700 kg

Condition: good (used), Year of construction: 1991, Hydr.horizontal straightening and bending press Pressure capacity max.160 t MAE Type:HY RI 160 RH Year.1991. Rjdpfx Aajcffzaj Dot For more data see data sheet.

Year of construction: 1985, condition: excellent (used), machine/vehicle number: 2476, for spindle taper: MK 4 Rsdod R Em Ispfx Aa Dot Max. Input speed: 1500 rpm Diameter up to: 10.2 mm Shank Diameter for quill: Construction height: 500 mm Weight:

Condition: good (used), for spindle taper: MK 3 Drilling Ø: 10 mm Thread cutting: M 5 / M 8 Redped R Atcefx Aa Dst min./max. Spindle distance: 35/120 mm Case diameter: 170 mm Case length: 218 mm weight: