Tapping Machine

DUMETA D-BD-M16

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Lrodpfofg U Sqox Afajk Also available: M14 to M24 and M27 to M33.

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Lrjdjv S E Edjpfx Afask

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power. Lodpfx Ajvxwkfefajrk

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Ledjgbfaxepfx Afaerk Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Electrical height adjustment of the cabin for body-friendly posture. Memory position storage for 3 heights. Dust extraction filter 2000m³/h 2,2kW. Lredpfx Asga Ehbefask

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Ljdpfxjfx Hv Ho Afasrk hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: new, Year of construction: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Ljdpfehgiuhsx Afaork Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High performance - bench tapping machines on T-slot plate Lrodpfx Afsf Tcy Deajk Technical data: - Tapping capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer - mobile underframe - space requirement approx. W 2400 x H 2000 x D 1000 mm - weight approx. 1100 kg

Condition: new, - Shaft diameter 50 mm - The upper roller is hydraulically moved - Three rollers are driven - Digital display - Can be used horizontally/vertically - Foot switch - Emergency stop - Documentation - 400 V Lrodpfx Ajgg N Twefajk

Condition: used, Year of construction: 2015, operating hours: 10,700 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 48 kVA, controller model: Heidenhain TNC 640, table width: 800 mm, table length: 650 mm, rotary table diameter: 650 mm, overall weight: 11,600 kg, spindle speed (max.): 20,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used DMG MORI DMU 75 monoBLOCK universal machining center, year of manufacture 2015. Machine type: DMU 75 monoBLOCK Serial number: 12430004943 Year of manufacture: 2015 Maximum spindle speed: 20,000 rpm Weight: 11,600 kg Phases: L1, L2, L3, N, PE Connected load: 48 kVA Maximum operating current: 70 A Fuse protection: 80 A Short-circuit current: 0.80 kA Motor voltage: 440 ±10 V Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage AC: 230 V Auxiliary voltage DC: 24 V Internal coolant supply: 40 bar Tool holder: SK40 Operating hours: CNC on: 33,043 h Machine on: 30,184 h Program run: 13,471 h Operating time: 10,700 h If you have any questions or need further information, please do not hesitate to contact us. The machine is located in Osterode/Harz and can be inspected by appointment. Ljdpfey Dq Hpox Afaork This is a used machine and therefore sold with exclusion of any warranty.