CNC lathe

DMG MORI G100/300

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Bljdpfxoiq Hxvo Amren Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Bodpfx Amjmdn Trjrsln Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Bledpfsxc I Dgjx Amron Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Year of construction: 2019, condition: used, Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h, Control: Heidenhain. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible. Bjdpfszwftbsx Amrsln

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,000 h, overall weight: 3,900 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Internal machining adapter/shell kit • Preciflex active holder additional adapter set • A set of little used tool set is available for an additional price. Bsdpfxjx D I T Rj Amrsln Technical Machine Benefits • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) • End surface treatment holder • Internal machining holder • Double external turning tool holder (both sides) • Triple internal machining holder • Axial active tool holder (left side) • Axial active tool holder (left side) • Radial active tool holder Extra Information Machine still under power

Condition: good (used), Year of construction: 1988, pressure 15 t throat 180 mm stroke 6 - 60 mm no. of strokes 145 Hub/min ram adjustment 40 mm table surface area 400 x 270 mm hole in the table 100 mm ram surface 120 x 100 mm dayligth 250 mm Bledpjt Tqglsfx Amrsn total power requirement 1,1 kW weight of the machine ca. 1150 kg dimensions of the machine ca. 0,96 x 1,34 x 1,88 m

Condition: good (used), Year of construction: 1998, functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, working width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. Bljdpoq Ikhpjfx Amron On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Blodpfsu Dahnjx Amron Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Bjdpehp Rcyjfx Amroln Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Aluminum fence cheek

Condition: excellent (used), Year of construction: 2020, - Siemens Sinumerik 828D control system - Accessories: Collet chuck Working area Swinging diameter over bed ø250 mm Swinging diameter over cross slide ø85 mm Maximum turning diameter ø85 mm Maximum turning length 225 mm Maximum bar capacity ø25.5 mm Distance between centers (spindle nose – tailstock center) 405 mm Slide travel range Slide travel X 100 mm Slide travel Z 300 mm Main spindle Spindle mounting (centering rim) ø70 h5 Spindle outer diameter at front bearing ø50 mm Main spindle clamping system Hollow cylinder (pneumatic) with draw tube, max. passage ø25.5 mm Max. chuck size ø100 mm Main spindle drive AC motor, power (100%/40% ED) with integrated holding brake for driven tools 3.7 / 5.5 kW Speed range (continuously variable) 60-6300 rpm Max. torque 35 Nm Dimensions Height of the turning axis above the floor 1130 mm Overall height 1820 mm Blsdpfxjzcv Rij Amrsn Footprint (without options) 1700 x 1270 mm Weight 1400 kg