CNC turn-mill center

DMG Gildemeister CTX 410

Condition: used, Year of construction: 2005, CNC Turn-Mill Center CTX 410 - Year 2005 Heidenhain Plus IT control - 3-jaw chuck - Driven tool positions - Tailstock - Chip conveyor - Coolant tank Nkjdpfx Aexlthvohvou

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MAIN SPINDLE: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4,000 rpm Max. spindle bore: 80 mm Max. machinable diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools: 12 pcs. Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6,000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3,800 x 2,143 mm Machine height: 2,232 mm Machine weight: 6,100 kg ACCESSORIES: Control: MORI MSX-850 II Tool measuring device Nksdpfsx Rvgzex Ahvju Parts removal Chip conveyor Coolant tank Tool holders and driven tools

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load Nodexiymtspfx Ahvoku - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Nedpfjw Tg Adsx Ahvsku Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm Nkedpfx Ahsw Rrvwsvou

Condition: excellent (used), Year of construction: 2000, Siemens control unit Bar passage 32 mm 2 x 12-position turrets with driven tools Main / counter spindle Y-axis turret top Parts lifting device Chip conveyor IRCO bar loading magazine Nsdpfx Aewh U Edshvoku

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Nodpfsx Hqh Sjx Ahvjku

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Travel paths X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 rpm Nedexc N Iyjpfx Ahvsku 20-position tool magazine SK 40 4th axis Lehmann

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Year: 2003 Distance Between Centres: 2000mm Spindle Bore: 8" (200mm) Machine with: Nksdpfxowmqkyo Ahveu Front & Rear chucks Tailstock Fixed Steady

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Nedsvr Eh Eopfx Ahveku Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel