2003 Deckel Maho DMU200P

Deckel Maho DMU200P

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotary table diameter: 1,700 mm, rotational speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Dsdpfjxuqn Sox Aiwjut Paper band filter Measuring probe Electronic handwheel

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Duedpfx Aijylw Stjwst Taper Size SK 40

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Duedpfxjyq Rpcs Aiwot Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 132612 Spindle Working: 68009 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. Djdpsx D Ux Tsfx Aiwout The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane Dusdextyvpopfx Aiwot There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Collection preferred

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm Dsdpfow Intajx Aiwsut --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Duedpfxowm Rqaj Aiwet Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Dsdpfx Aisvu Dfbewsut

Condition: new, Pit furnace, make VEI type: SCO_EB clear height: 1200mm clear diameter: 1400 mm outer diameter: 2200 mm Duodpfx Aijg R Snhjwet outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Djdpfew Uk A Rsx Aiwjut