Universal machining center

Deckel Maho DMU 80P Hi-Dyn

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Ppsdpfx Aoy Szq Usmkjt Heidenhain TS 642 probe

Condition: refurbished (used), Conventional parallel lathe MORANDO Mod. SR26 1300 X 7000 mm Completely reconditioned CE machine. New Turcite, new electrical/hydraulic part. Grinding. Accident prevention regulations with guards. Psdpfewbfw Dsx Amkspt Heavy series with a single cast iron casting. Guides like new. 4-jaw platform diameter mm 1700. Nr.02 Steady rests. Admissible weight between the centers without steady rests Kg 25,000 – 30,000. Admissible weight between the centers with steady rests and tailstock kg 38,000. Height of points: 1300 mm. Vaulting above the guides: 2615 mm. Vaulting above the carriage: 2240 mm. Bench width: 1500 mm. Distance between points: 7000 mm. Platform diameter: 1700 mm. Spindle motor: 50 – 80 Hp. Speed ranges: No. 24. Spindle speed range: 1 – 200 rpm. Dimensions: Length 11,800 mm. Height 3000 mm. Weight approx. 35,000 kg. Visible in operation.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 16,700 h, spindle speed (max.): 6,300 rpm, total height: 2,750 mm, overall weight: 10,200 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 16,000 W, product length (max.): 6,600 mm, table load: 600 kg, number of axes: 5, This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details. • Spindle torque: 475 Nm (40% DC) • Tool changer: 60 positions (chain magazine) • Rapid traverse (X/Y/Z): 50 m/min • Feed rate (X/Y/Z): 50,000 mm/min • Table: NC swivel rotary table (d 630 mm) • Swivel range: -45° to +30° • Cooling: 40 bar internal coolant supply (IKZ) through spindle center • Power consumption: 50 kVA • Defect: Transmission damage Ppjdpfjy I Aquox Amkst Additional equipment • Chip conveyor: Scraper belt type, discharge height 956 mm Technical Specification Taper Size SK 40

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Ppedpfjym Rnkex Amkst Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests Pedpfx Amjw U Uhkokopt 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Max. turning Ø:800mm Length: 7000mm Width: 2500mm Height: 2500mm Pjdpoygv Euefx Amkept Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Ppjdpfx Amex I Rkpsket Descriptionis and technical details are on photos.

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Maximum total tool mass: 33 kg Pjdpfxjx Hqwas Amkopt Number of tools: 21 Spindle speed: 24,000 rpm No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Distance between centers: 2000 mm Ø Swing over bed : 720 mm Ø Over carriage: 470 mm Spindle diameter : 104 mm Podpoxdub Iofx Amkjpt Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Total power : 28 kw

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, functionality: fully functional, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub-Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools at Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/parting-off blade (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub-spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Power supply: 8 kVA Pjdpjxf Hqqefx Amkopt EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub-spindle - Main spindle with C-axis - Sub-spindle with C-axis - 3x powered tool rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 bar feeder - Option for long parts - Spindle flushing (Scherzinger pump)