700X1100MM COLUMN SEMI-AUTOMATIC SAW

CRONOSSTECH CRONOSS 700X1100 SY

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 1,000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Djdpfx Asxpiw Uoiwsut Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Dsdpfx Aioxrg E Iowout Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system Dujdpfjx H Tadsx Aiwot - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: Dusdpsxup Rfefx Aiwet - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Djdpswf Dpgefx Aiwout Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: new, Year of construction: 2023, saw band length: 5,450 mm, saw band width: 41 mm, Double column bandsaw fully automatic Everising H-460 HB Cutting range round: 0 - 460mm Cutting range square: 460 x 460mm Bundle tension: Width: 195 - 310mm Bundle tension height: 120 - 230mm Drive power: 5.5 kW Saw blade dimensions: 5450 x 41 x 1.3mm Weight: 3030 KG Machine dimensions: 2820 x 2190mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor Djdpfx Aoq Ulxgeiwjut - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Dodpjq Tpkysfx Aiwout Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm Dedpfx Aswm Rm Ijiwsut cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: used, functionality: fully functional, power: 193 kW (262.41 HP), fuel type: diesel, color: yellow, operation weight: 24,000 kg, tire condition: 70 %, Year of construction: 2002, machine/vehicle number: 50561, Product Description Used Wheel Loader machinery Manufactured by Komatsu model WA470-5H wheel loader Operates on Diesel Engine Machine sold as its condition Dodpfeum N Tqsx Aiwjut Please contact VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm Duodpfxstycdkj Aiwjt column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement