Wood shredder

COMAFER Brio 280

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: Fedjua Tbwspfx Akyjpn The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, machine/vehicle number: 14130, Rotor diameter: approx. 280 mm Rotor width: 500 mm Number of rotor blades: 16 Inlet cross-section: approx. 480 x 500 mm Fodpfjzrqpwjx Akyepn Drive motor: 15 kW

Condition: new, range L-W-H 1700 x 485 x 950 mm weight 116 kg 6 St. Fjdeu Imfujpfx Akyopn Internal dimensions of the top drawer 1390 x 360 x 60 mm. Internal dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Internal dimensions of the left fifth la 440 x 380 x 210 mm. Internal dimensions of the shelf behind the doors 940 x 450 x 390 mm. Wheel dimensions 150 x 40 mm. The thickness of the solid wood panel 40 mm. Packaging dimensions 153 x 49 x 96 cm. Weight 116kg.

Condition: defective spare-parts repository (used), Year of construction: 1995, Shredder, make Weima WL 14, with fire damage – for dismantling or refurbishment. The following parts can still be used: base frame with hopper and drawer, rotor with gearbox, discharge screw, perforated screen. All other components must be replaced. Fpodpfx Ajy Aryuekyjn

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation Fjdpfowv Hmvox Akyepn No PLC installed yet Partially overhauled New rotor bearings

Year of construction: 2000, condition: ready for operation (used), A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Fsdpfxoyb Sclj Akyopn

Condition: good (used), Used shredder in good condition for sale. Serviced on August 26. * Available at a special price of €9,950 net plus VAT, ex works Neckartailfingen. For shredding hard and soft wood of all kinds. Fpedpezu Rz Sjfx Akysn Motor: 15 kW Weight: approx. 1,300 kg Used machine, sold as is. Functional guarantee upon delivery.

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Fpsdpfx Akjuw Skhoyen Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Price for buying both machines: €11,900

Condition: used, Plant: Chamber filter press used, on steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Fjdjrk Ebkepfx Akyepn Filter plate format: 1200x1200 Number of plates: approx. 125 Filter plates: PP Cake thickness: 30 mm Chamber volume: approx. 3.8 m3 Filter cloths: optionally available to suit the medium Filter pressure: approx. 15 bar Pump technology: optional on request Power connection: 400 Volt / 125 A (CEE) Weight: approx. 65 tons plus filter cake Chamber volume: approx. 3.8 m³ Polymer post-dosing pump: e.g. max. 1.5 m³/h - optional on request Polymer hand attachment: optional on request - available e.g. consisting of 2 agitator tanks with agitator approx. 2m³ Sludge conditioning tank: optional - by arrangement e.g. volume approx. 1.8 cbm Purchase or hire: Inspection of the systems by arrangement at our factory. Miscellaneous: Would you like to rent or buy this plant? Please contact us, we will be happy to help you.

Condition: used, Year of construction: 1985, 1x Used MOCO AZ-8 Shredder Fjdpjzx Svxsfx Akyepn Drive power: 7.5 kW