Press brake

COLLY

Condition: good (used), functionality: fully functional, Year of construction: 1996, control type: PLC-controlled, degree of automation: manual, actuation type: hydraulic, working width: 1,020 mm, sheet thickness steel (max.): 20 mm, type of input current: three-phase, overall weight: 11,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Hydraulic guillotine shear, guillotine for cutting thick steel plates. Manufacturer - COLLY F France; Model - CGH 2010; Year of manufacture - 1996; Blade length - 1020 mm; Cutting thickness - 20 mm; Number of knife cycles per minute - 7; Electric back gauge with Elgo programmer; Photoelectric safety barrier; Motor power - 30 kW; Kjdpfx Ajx Hrrlohvjdi Base dimensions - 156 x 190 cm; Height - 210 cm; Weight - 11,000 kg; CE - yes. Machine connected, ready for inspection.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm Kodow Sthdopfx Ahvsdi - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx.: 3500 kg

Condition: used, Press Brake Brand: COLLY Model: 1710 Capacity: 4000 x 170T Vertical stroke: 7–250 mm Working speed: 7.5 mm/s Distance between uprights: 3100 mm Kdodpoyf A T Nefx Ahvsi Throat depth: 300 mm Table width: 240 mm Distance table–ram: 500 mm Motor power: 18.6 kW Dimensions: 4150 x 1690 x 2950 mm Weight: 14 T

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 10,246 h, machine/vehicle number: 5022/03, working width: 3,000 mm, 1995 COLLY folding machine in working order. DELEM DA20 numerical control Kdsdpfx Ahsu E Eyrevoi Power 125T for 3m

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment Kodpfx Aswkttrshvedi • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Kdodjxnilvepfx Ahvji Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: good (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, stroke length: 220 mm, throat depth: 410 mm, distance between stands: 2,610 mm, number of axes: 8, type of crowning: CNC-controlled, back gauge adjustment: CNC-controlled, overall weight: 10,500 kg, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, power: 9 kW (12.24 HP), pressing force: 125 t, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Kdsdpowrx Tmofx Ahvsi Hydraulic clamping of punches Segmented tooling MACHINE OFF GROUND Specifications Bending length: 3050 mm Power: 125 tons Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Kdodpfxsv Ibkbj Ahvji Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 tons

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg Kdjdpfx Ahewgkq Tovsi

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Press force: 600 kN Weight: 4000 kg Power: 10 KW Kdedjp R Ircjpfx Ahvei