Foundry Manipulator

CLANSMAN DYNAMICS Capacity: 250 KG

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the Dedpfjuxmt Tsx Ab Tecr foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Control system S/7 Hopper mill Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Core sand mixing unit, manufacturer Klein YXLON X-ray system Dcsdpfxevz Aprj Ab Ter Spectral analysis Spectro Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Dedpsgqr A Djfx Ab Tjcr

Condition: excellent (used), Eos Type: EOS M270 Metal laser sintering system Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Dcsdpfx Abeu Ebpcj Tor Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (incl. build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner System was upgraded to Scanlab hurrySCAN 30 for a more precise print image Focus diameter 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock Dcedpfx Aod Tx A Esb Tsr

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' Dcsdpfx Ajwtzpysb Tsr - 7.5 kg capacity moulds on transfer chain - Propane burner - CSA approved

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Extendable : 700 mm x 1400 mm Angle of rotation around longitudinal pivot : 360` Dcsdpfx Abopu D Dzj Tjr

Condition: good (used), Year of construction: 2012, functionality: fully functional, - Year of manufacture / commissioning: 2012 - Technical documentation is available. - The machine can be operated from the control panel or via a remote control. - The machine's operating system is Windows 7. Dcjdpfeuxt I Dex Ab Ter - Control unit - Sand mixer - Sand station with New sand, Reclaimed sand, - Chemical station whit ALPHASET TPA 180 and INDUSTOL ABS - If desired, the machine operator can be requested to explain the machine's operation - I.M.F. T36/50-SB 2012 1 continuous mixer Europe double-articulated style, upright, capacity 50 t/h, radius 6,5 + 2 m, height adjustable - The price includes the entire I.M.F. T36/50-SB sand mixing system - Offers are accepted

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,000 h, total length: 775 mm, total height: 1,135 mm, type of input current: AC, overall weight: 110 kg, Sale due to non-use, large format industrial multi-nozzle hot chamber 3D printer with a print volume of 600x325x500 mm with active chamber heating and 3 extruders. The printer is in perfect working order, has been completely overhauled less than 6 months ago and has new nozzles, new wire motors and updated firmware. Dodpfx Ajv Td Nkeb Tecr Complete with trolley and Hepa filter, additional spare parts and proprietary material included in the offer (approximately 8kg) We remain at your disposal for further information.

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Very well-preserved double-pressure press DM3 from Heuer Hammer. Immediately ready for use. Dcjdpfsxywlnox Ab Tjr