Tool grinding machine

Chuet Nevers Schleifscheiben Ø max. 200 mm

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° Dksdpfx Aajq Dzkueaji • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Dkodpfx Aaehclffoaji Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice Dsdpfx Aaofg E Hljaoki • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), functionality: fully functional, 1 Used Haeger 412 Insertion Machine Sheet Metal Inserts Stud & Nut Self Clinching For Sale With tooling and J shape lower tool Dkedpfx Aaewbhipeasi

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Djdpfx Aov S Hy Aoaaski Branded machine in very good condition,

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen Dksdpfxsuthz Te Aaaoi - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle lock, gear reduction) with 7 seats Dkjdpfx Aefarx Uoaaji Water tank: 2,500 liters Pump: Metz with 2,800 l/min Additional equipment: Quick attack on the right with 50 meter hose Dimensions (LxWxH): 7100 x 2300 x 3000mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Dksdpfx Ajwkttrsaaoi Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 Djdjvr S Ulopfx Aaaski total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Condition: excellent (used), Free-standing aluminium silo on foot ring (previously used as a milk powder silo) – used – designed for a bulk density of 0.65 kg/dm³ Volume: 94,000 litres Manufacturer: P+W Metallbau Quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,000 mm Material: AlMg3 Bulk density: 0.65 kg/dm³ Upper head roof pitch: 15° Equipment and connections: Upper head: 1 x access manhole DN 600 with cover 1 x vent nozzle DN 300 with hood 4 x flange DN 100 2 x flange DN 150 Shell: 1 x access door, approx. 850 x 2000 mm with ventilation slots 1 x flange DN 50 for sensor probe 6 x pipe holders for fill pipe (fill pipe not included) 6 x brackets for access ladder (ladder not included) Various pipe penetrations in the area of the lower supporting ring Dkodpfx Aaei E Hnyeasi The silo has a 60° cone at the bottom with a vibrating floor (DN 1500). The currently installed measuring and control technology is included in the price, but no warranty is given for its functionality! Otherwise as per images and drawing.