Lunette

Cazeneuve HB725/HB800/HBX360

Condition: ready for operation (used), Year of construction: 2008, Ernault Somua CNC Lathe 1400x8000 CNC system Fanuc 21i TB Maximum turning diameter: 1400 mm Klsdpfx Aeyly Nbsh Eeu Maximum workpiece length: 8000 mm Maximum turning diameter over cross slide: 1100 mm Spindle diameter: 235 mm Maximum workpiece weight: 25,000 kg Motor power: 75 kW Video of the machine under power available!

Condition: used, Year of construction: 1990, grinding length 1500 mm grinding width 550 mm workpiece height 400/450 mm Klsdpewlvirefx Ah Esu table-size 1900 x 450 mm mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 15 kW voltage 380 V weight of the machine ca. 5 t Machine was reconditioned and modernized in 2015 with modern control. Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Machine runs smoothly Travel distances X 635 Y 510 Z 460 Tool holder SK 40 Kedpfx Ahew Tir Ue Ejlu 20-position tool changer Table 790×560 with chip conveyor Weight approx. 3700 kg This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Kedpfx Ahjwftcvo Eelu

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V Klodowgnz Ajpfx Ah Eeu weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, any angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Rated drive power: 10 hp Kedpfxjdbny Ej Ah Eelu Max. speed: 1800 rpm Weight: approx. 82 kg Accessories / Special features: • Tool clamping: manual • The main spindle and all shafts and fittings are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered fittings are ground according to the "KLINGELNBERG" system • The rolling bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw • Operating manual Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL Ksdpoxp Na Nofx Ah Eolu SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: used, Year of construction: 2011, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Mori Seiki NL2500SY-700 Brand: Mori Seiki Model: NL2500SY-700 Category: CNC Lathe Year: 2011 CNC Control: Mori Seiki MSX-850 IV Machine weight: 6.2 tons Capacity Max. swing over bed: Ø 579.8 mm Max. swing over carriage: Ø 755 mm Max. turning diameter: Ø 356 mm Max. turning length: 705 mm Bar capacity: Ø 80 mm Axis travels X-axis: 260 mm Y-axis: ± 50 mm (100 mm total) Z-axis: 795 mm C-axis: ± 360° Main spindle Spindle diameter: 254 mm Speed: 4,000 rpm Spindle nose: ASA-8 C-axis indexing: 0.001° Power: 18.5 kW (cont./30 min) Klodpfx Ahjyxmh Sj Eou Sub spindle Speed: 5,000 rpm Spindle nose: ASA-6 C-axis indexing: 0.001° Power: 15 kW (cont./30 min) Turret 12 driven tool stations Tool speed: 6,000 rpm Tool power: 5.5 kW Turning tools: 25x25 mm Boring: Ø 50 mm Feed rates Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 10,000 mm/min C-axis: 400 rpm Accessories Static toolholders + 4 driven (2 radial, 2 axial) Chip conveyor + tank Top Automazioni – Magic bar feeder Electrical transformer Part unloading arm 250-liter coolant tank Manuals + electrical diagrams CE Declaration

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Klsdpfx Ahsxu Nc Ie Eou Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: refurbished (used), Year of construction: 2026, Conventional Lathe type TR 135B2 x 6m after general overhaul, equipped with a heavy tailstock and compound with T-slots. Technical data: Swing over bed: 1350 mm Swing over carriage: 1000 mm Distance between centers 6000mm Maximum workpiece weight between centers: 9,000 kg Maximum workpiece weight between centers with one steady: 10,500 kg Maximum workpiece weight between centers with two steadies 12,000 kg Special equipment included in the price of the lathe: Kledpfx Ahek Itipj Eju - 4-jaws independent chuck dia. 1000mm - roller steady rest dia. 40-400mm - roller steady rest dia. 400-600mm - automatic lubrication for the carrriage, - lighting lamp, - cooling system.. 12 months material warranty.