Veneer guillotine

CASATI

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Maximum thickness 45 mm Bledpfx Asv Nzpmsk Esg Built in 1994 With spare blade

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings Bjdodxz Tpopfx Ak Ejlg • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: excellent (used), functionality: fully functional, cutting length (max.): 3,100 mm, Veneer Guillotine Casati Macchine CIP31 Bljdpfx Asyzzccjk Ejg Working length: 3100 mm Total length: 4070 mm

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Blodpfx Aeyq Ez Hek Ejg Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements Blodpfx Aksiidm No Ejg - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), glue thread sewing machine zigzag stitching pedal control arm clearance 650 mm Blodpsyr Nmvefx Ak Eog 230V power supply

Condition: good (used), Code: 0058 Brand: CASATI MACCHINE Model: Z 1000 - CE Standard Veneer splicing machine - CE Standard Technical data: Arm lenght mm 1000 Veneer thickness mm 0,4-2 Feed speed mt/min 8-18 Total electric power Kw 0,5 Electronic adjustment of the temperature Overall dimensions : mm 1300 x 500 x 1300 h Weight kg 200 Bjdpfxeyg N Eno Ak Ejlg

Condition: used, machine/vehicle number: 007875, Max. panel width: 3800 mm Max. panel length: 2200 mm Bjdpfxowkf Axe Ak Eolg Main saw blade projection: 130 mm No of Grippers: 7

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Bledpfoyf Eucox Ak Eog Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: excellent (used), functionality: fully functional, working width 3100 mm working height 55 mm main motor power 4 kW Bljdpfeyhn Scsx Ak Ejg cast iron frame safety light barriers power supply 380V

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 TECHNICAL DATA: Bljdeg Rn Iaspfx Ak Esg Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: excellent (used), Veneer Guillotine Casati Macchine CIM31 Working length: 3,100 mm Max working height: 45 mm Manual fence adjustment Bedpexu E Ruofx Ak Eelg Maximum cutting width: 500 mm Safety light barriers

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Bjdpfx Aeqzky Esk Eelg Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Blodsxczmzjpfx Ak Eeg Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: repair required (used), Year of construction: 1997, Brand: Casati Model: Z1000 Machine no: 9709021 Year of manufacture: 1997 Bjdpfx Akjvw Tnke Ejlg