Used lowboy semi-trailers / low loaders for sale (212)

Condition: new, empty load weight: 736 kg, maximum load weight: 2,764 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.1 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 736 kg - Payload: 2.764 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kwodpfx Aheu Hrhrovew

Condition: new, empty load weight: 731 kg, maximum load weight: 2,769 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, extremely robust body, hole lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely robust body / hole lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 731 kg - Payload: 2.769 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded. Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kwjdpfxeu Hrkgs Ahvew

Condition: new, empty load weight: 776 kg, maximum load weight: 2,724 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage, * IMMEDIATELY AVAILABLE * Heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 776 kg - Payload: 2.724 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Kwedpfx Aou Hrldjhvew

Condition: used, maximum load weight: 19,080 kg, overall weight: 28,480 kg, axle configuration: 2 axles, first registration: 08/2025, next inspection (TÜV): 08/2026, CAUTION: To be operated only with tipping hydraulics! BPW 10t axles, 2 steering axles, CAUTION: To be operated only with tipping hydraulics! Fifth wheel height 1.25m, CAUTION: To be operated only with tipping hydraulics! Fifth wheel height 1.25m, hydraulic 1400x700 + manual 700, Ksdpfjykgkcsx Ahvjww

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres Kedpfx Aeyii Apjhvsww * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-Axle Step Frame Semi-Trailer in extendable version with Fassi Crane F545RA.2.26 Mega Lowliner as step frame semi-trailer. Chassis Welded construction with cross members, made entirely from high-quality steel Neck construction reinforced for front-mounted crane Axles 2 BPW axles, each with 10,000 kg load capacity, 17.5" drum brakes ABS: 1 axle sensor-controlled Axle spacing: 1,810 mm Both axles equipped with forced steering Tyres 8x type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET=122 mm offset Lighting system 24V lighting system compliant with EU Directives 76/756/EWG and following, with: 2x2 three-chamber LED taillights 1x LED reversing light 1x LED fog light LED side marker lights Lane keeping lamps License plate illumination 2x 7-pin sockets + 1x 15-pin socket wired according to EU standard Floor Anti-slip birch plywood flooring Steel checker plate above axle area Load securing Outer frame with lashing hole profile D030 mm on inclined edge 2x12 lashing points 8,000 daN in outer frame 3x rows of combination pin stake pockets for 80x80 mm stakes in the low bed Accessories 2x wheel chocks with holders Spare wheel holder with winch 2x storage boxes with sliding compartment (for chain storage), etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional outrigger beams 360° working area Approx. 100% outreach forward The attached images are sample images. We manufacture crane semi-trailers in various versions. For further information, we are at your disposal. Upon request, we will provide you with a customised quotation tailored to your equipment requirements. Kwsdpfx Aheyihgysvsw

Condition: used, empty load weight: 6,990 kg, maximum load weight: 28,010 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2021, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, trailing steering last axle, ABS (anti-lock braking system), lashing rings, underrun protection, support legs, storage box. Body: 2 units available! Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,488 mm Kjdpex I I Apefx Ahveww Gooseneck length approx.: 4,050 mm Lowbed length approx.: 9,600 mm Loaded deck height in lowbed approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 1,150 mm King pin mounting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grained steel welded construction, reinforced version. Fifth wheel plate with interchangeable 2" king pin. Outer frame slightly inclined with “Load-Lock profile” for attaching tie-down straps. 8 additional pairs of lashing rings recessed into the outer frame, each rated 5 t. 1x removable adjustable block (3-piece) on the low loader deck. Wooden cross supports on top, at least 200 mm wide, for height compensation. Gooseneck adjustable to 3 positions, with parking position at the bend. 4 pairs of stake pockets 83 x 83 mm recessed in the floor for installing the adjustable block. Open storage compartment for insertable stakes beneath the loading area. 13 pairs of stake pockets recessed into the outer frame (70 x 40 mm internal dimensions; 3 pairs on the gooseneck and 10 pairs on the lowbed deck). 3 rows of stake pockets (each with 7 pockets, 70 x 40 mm) recessed in the floor. 26 removable stakes, dimensions: width 80 mm / thickness 50 mm / length 1,200 mm, hot-dip galvanized. Hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area. Steel/chequer plate flooring. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale and errors excepted!

Condition: used, empty load weight: 6,990 kg, maximum load weight: 28,010 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2021, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, rear axle with steering function, ABS (anti-lock braking system), lashing rings, underrun protection, supports, storage box. Kodpjxz Hk Aofx Ahvsww Superstructure: 2 units available! Total length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed (loaded) approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 1,150 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grained steel welded construction, reinforced version, fifth wheel plate with interchangeable 2" king pin, outer frame slightly slanted with “Load-Lock Profile” for attaching lashing straps, 8 pairs of additional lashing rings recessed in the outer frame (each rated at 5 tons), 1 plug-in compensating trestle (3-piece) on the low-bed platform, wooden cross beams on top at least 200 mm wide for height compensation; gooseneck with 3 plug-in positions including parking position at the cranked section, 4 pairs of stake pockets (83 x 83 mm) recessed into the floor for inserting the compensating trestle, open storage compartment for insert stakes underneath the loading platform, 13 pairs of stake pockets recessed into the outer frame (internal dimensions 70 x 40 mm: 3 pairs on gooseneck, 10 pairs on low-bed), 3 rows of stake pockets recessed into the floor, each with 7 stake pockets (70 x 40 mm internal), 26 removable galvanized stakes (B=80 mm/T=50 mm/L=1200 mm), hardwood floor approx. 30 mm thick, longitudinally laid with Omega profiles for high point load capacity in the wheel arch area (steel/chequer plate floor). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to modifications, prior sale and errors excepted!

Condition: used, empty load weight: 22,900 kg, maximum load weight: 41,100 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 10/2009, suspension: air, tire size: 235/75 17,5, tire condition: 70 %, color: green, Year of construction: 2009, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40194 Goldhofer, STZ-VL4-42/80A * Year of manufacture: 2009 * ABS, Anti-lock Braking System * Air suspension * Steering axle * Air connection coupling head (red + yellow) * Spare wheel holder with spare tire * Connection plug: 2x 7-pin * Lifting and lowering device * Extendable * Telescopic – telescopic semi-trailer * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 64,000 kg * Unladen weight: 22,900 kg * Payload: 41,100 kg * Permissible gross weight: 64,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 70% – 70% | Tire size: 235/75 R17.5 * Tire condition 2nd axle: 70% – 70% | Tire size: 235/75 R17.5 * Tire condition 3rd axle: 70% – 70% | Tire size: 235/75 R17.5 * Tire condition 4th axle: 70% – 70% | Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Telescopable approx. 4,000 mm * Deck height above axles: approx. 1,000 mm Kwjdpfxsyict Uo Ahvjw * Deck height above ground: approx. 360 mm * Expandable to 3,200 mm * Removable gooseneck Liability disclaimer: Subject to modifications, prior sale, and errors excepted. More photos and videos are available on our homepage. Our comprehensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Processing of all (export) documents * Ordering export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Consult our trained specialist staff – we are happy to advise you.

Condition: used, empty load weight: 8,600 kg, maximum load weight: 35,900 kg, overall weight: 44,500 kg, axle configuration: > 3 axles, first registration: 10/2006, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 2006, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69977 Goldhofer, STN-L3-37/80A * Year of manufacture: 2006 * ABS, Anti-lock Braking System * Air suspension * Retractable lashing rings * Self-tracking rear axle * Air connection coupling heads (red + yellow) * Spare wheel carrier with spare wheel * 2x 7-pin connector plugs * Lifting and lowering device * Telescopic – extendable trailer * Heavy-duty lashing rings * Rear support * Suspension: Air Kodoyicanepfx Ahvoww * Gross vehicle weight: 44,500 kg * Unladen weight: 8,600 kg * Payload: 35,900 kg * Perm. total weight: 44,500 kg * Tyre condition 1st axle: 50% – size: 235/75 R17.5 * Tyre condition 2nd axle: 50% – size: 235/75 R17.5 * Tyre condition 3rd axle: 50% – size: 235/75 R17.5 * Tyre sizes: 235/75 R17.5 * Platform length: 9,000 mm * Rust present * Sale only without TÜV (roadworthiness certificate) Disclaimer: Specifications are subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive services include, for example: * Purchasing/selling/renting commercial vehicles * Fast and straightforward financing * Handling of all (export) documentation * Ordering of export and customs licence plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transferring commercial vehicles Please contact our trained staff – we are happy to advise you.

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 12/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 68575 Nooteboom, Euro specification * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF% * Tyre condition 1st axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre condition 2nd axle: 40% -- 40% | Tyre size: 235/75 R17.5 Ksdeyibz Repfx Ahvoww * Tyre condition 3rd axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre sizes: 235/75 R17.5 * Manufacturer: ES-GE * 3rd axle: hydraulically forced-steered * Telescopic extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications are subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and hassle-free financing options * Application for all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TüV approvals, registration service * Transfer of commercial vehicles Feel free to contact our trained specialist staff for professional advice.

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 Kjdeyib Ahepfx Ahvjww * Air suspension * Steering axle * Forced-steered axle * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: used, maximum load weight: 33,525 kg, overall weight: 46,000 kg, axle configuration: > 3 axles, first registration: 04/2008, Year of construction: 2008, Equipment: ABS, Manufacturer Kel-Berg / Faymonville Model 4 akslet 3 m Udtræks Maskintrailer Year 2008 Condition Good Serial Number SKBE58S407KE12547 Ref. nr. 7972 Reg. date: 30-04-2008 Last seen: 27-01-2025 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 30-50% Toolbox: ? Total weight: 46000 Kg Net weight: 12575 Kg Load capacity 33425 Kg Inside length: 8.75m / 12.10m Extraction: 3 m Forced steering axles: 3+4 Hydraulic ramps: ? Kwedpfx Ahjxa Tdmjvew Hydraulic rear support leg: ?

Condition: used, empty load weight: 9,480 kg, maximum load weight: 31,520 kg, first registration: 03/2020, next inspection (TÜV): 04/2024, total length: 11,500 mm, total width: 25,500 mm, total height: 38,000 mm, suspension: air, tire size: 245/70 R 17.5/10mm, wheelbase: 1,800 mm, front tire size: 245/70 R 17.5/10mm, operation weight: 41,000 kg,

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Kwodpfoxarl Nsx Ahvsw Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available upon request. Kwsdpfx Ahsxbmpfsvow Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydromechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5 3PMSF tyres, load index (146/146 F) * Brand of our choice * TPMS tyre pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load) Brake system: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: * Entire steel construction automatically blast cleaned after welding with shot blasting system * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 volt lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2 inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection panel at the front * Electro-hydraulic unit * Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor) * Galvanized folding supports under the rear platform bevel * 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN) * On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container locks in t

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: Kwodpjxarlvjfx Ahvjw * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpts from the equipment list are detailed below. Full equipment details on request. Gooseneck: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6x4 or 8x4 Low-bed: Kodjxbmprjpfx Ahvoww * Low-bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical lock * Supply lines run protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear undercarriage: * Rear axle assembly with closed outer frame, checker plate surface and continuous prism excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 1 pair of lashing rings, horizontal in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, horizontal in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of our choice * Load index (146/146F) Braking system: Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Painting: * Complete steel structure automatically shot blasted with throw wheel system after welding * Second blasting using corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final painting: 2 layers of 2K topcoat, single-color RAL 3002 Carmine Red per RAL system 841GL Including the following accessories: * Preparation for the mounting of bolted container positions for 1x 20' or 1x 40' container on the external beams * Without container locks * 3.5 inch king pin * One galvanized steel front wall, approx. 400 mm high * Remote steering operation by cable at front and rear with push-button control, including single-track control of axles (installation in the tractor unit not included) * Electro-hydraulic unit * On the gooseneck: plug-in aluminium side walls and tailgate, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (body length approx. 2,120 mm) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings. No guarantee for seals * On the gooseneck, a separate air connection with air gun * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of screwable lashing rings M20 (LC 5,000 daN) * 2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm wide per side, extension planks made of hardwood. The maximum load is on an area of approx. 200x2

Condition: used, empty load weight: 8,370 kg, maximum load weight: 34,630 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 1,020 mm, suspension: air, tire size: 445/45R19.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, last axle with trailing steering, ABS (anti-lock braking system), lashing eyes, raise and lower function, detachable loading ramps, rear support, landing legs, toolbox. Body: Göbel low loader, 43,000 kg. Detachable ramps (reinforced version) available at an additional net cost of €1,800 Loading area: Gooseneck 4,500 mm, bed length 9,100 mm, 1st axle lift with starting assistance, 28 mm sealed hardwood floor, 25 pairs of flush-mounted heavy-duty lashing rings, each rated at 8,000 kg, side rail for lashing straps with claw hooks approx. every 500 mm, rated at 5,000 kg each, insert sleeves, 80 mm stake pockets, chassis hot-dip galvanized. For an additional charge, available with matching tractor unit 2648 LK (17697) and ballast platform (17699)! Kwsdpfx Ajyhrakshvew Approx. 54,160 km mileage! Loading height approx. 1,020 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: Ksdpfx Ahsyhkq Uevsww * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 51,780 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available units, on our website. Excerpt of Features. Full equipment list available upon request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm in length, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Gooseneck outer beam with fixture boreholes for screw-in lashing rings * One mounting hole in the upper rear area of the gooseneck outer beam for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in anodized aluminum side walls, approx. 400 mm high * On the gooseneck: 1 plug-in anodized aluminum rear wall, approx. 400 mm high * Heavy-duty hardwood flooring, approx. 40 mm over the gooseneck * 2-inch kingpin * 1 crosswise stake pocket rail in the gooseneck floor in front of the bevel, for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform, extending into the bevel, for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steered * 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually * Axle load capacity: 12,000 kg each, air suspension with raise/lower valve * Mechanical landing legs with 2-speed gearbox and crank * Hardwood flooring, approx. 50 mm thick, continuous and interrupted between axles (increases friction coefficient) * 1 intermediate table with recessed platform, approx. 300 mm wide, for the large-diameter extension tube with steel treadplate * 1 pair of lashing rings on the front cross-member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the outer frame (LC 10,000 daN) * Additional 1 pair of external lashing rings on the front cross-member, rotated approx. 90° towards the loading platform (LC 10,000 daN) * Extendable (galvanized) width extensions approx. 230 mm per side (without wood planks) * 1 pair of permanently installed open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), in the deck ahead of the 1st axle * Between 2nd and 3rd axles, 1 pair of fixed wheel recesses approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports Kodpfx Ahsyhkrlovoww * 245/70 R 17.5 3PMSF twin tires – manufacturer of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-section steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood-covered hydraulically foldable ramp ends * Each ramp hydraulically adjustable approx. 235 mm outwards and 215 mm inwards * Hardwood decking on loading platform bevel * Ramps with hardwood overlay BRAKE SYSTEM: * WABCO EBS-E brake system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% a...

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle fleet, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. Kwsdpsyhkrfefx Ahvsw GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, with rear chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except hydraulic winches * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Gooseneck covered with approx. 40 mm thick hardwood, king pin area with checker plate * 2" king pin LOADING AREA: * Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° * A depression in the platform and chamfer to take up excavator dipper sticks, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the truck via standard EBS interface in line with ISO 11992. For correct display, the truck must be able to transmit and display this data. * TPMS tire pressure sensors mounted on all wheels * BPW axles and suspension, 1st axle steered, all other axles hydro-mechanically forced-steered * 1st axle with electromagnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B, static test load = approx. 50,000 kg * 245/70 R 17.5 3PMSF twin tires. Brand at our discretion. Load index 143/141J (146/146F) * Loading area with continuous (between the axles interrupted) 50 mm thick hardwood floor (provides increased coefficient of friction) * Platform locked using welded-on conical locking profiles, every approx. 250 mm; includes pre-tensioning plate * 1 intermediate platform, approx. 300 mm wide, for large-diameter sliding tube * Intermediate platform with recessed loading area and extendable suspension bars for aluminum bridging elements * 1 pair of lashing rings on the front cross-member (LC 10,000 daN) * 8 pairs of recessed lashing rings in the outer frame of the loading area, fold-out to the outside (LC 10,000 daN) * Extendable (galvanized) platform wideners, approx. 230 mm each side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm in front of the axles, fully open to the gooseneck cross-member, approx. 700 x 410 mm (W x D) * ALU covers for the wheel recesses that can also be used as bridging elements for the extension OR as platform widening planks (if the vehicle is equipped with extendable wideners) * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * 1 pair of mechanical rear supports * Steering from front and rear via cable remote control, with single-track control of the axles HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-KG-HV-M: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: Kwsdpfeyhkrrsx Ahvjw * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) Kwodpfxjyhkqze Ahvjw * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) Kedoyhkqnjpfx Ahvjww * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig