Fixators

BWF 25 mm

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Bljdpok Dz N Isfx Acnel

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel Bledpfx Acsu N D Rqsnol - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: excellent (used), Year of construction: 2008, Machine is stocked in our Bulgaria Plovdiv showroom Spindle bore is 254 mm Machine has hydraulic turret system Hydraulic tailstock machining length is 4000 mm Swing over bed:1070 mm Swing over cross slide: 680 mm Fanuc control system Machine have steady rests. IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers Blsdpfx Asnyh Rwjcnjl %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Bodpfowdmy Eex Acnell Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. It can be connected and tested under power. Very good condition. X 11,500; Y 3,150; Z 2,000; clamping system M 100. Includes support column, 6 plates sized 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Bedoxwl Tbepfx Acnsll Weight approx. 200,000 kg.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. Bedpfsbatamjx Acnell - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 550 mm, table length: 380 mm, Equipment: documentation/manual, FANUC ALPHA T14iFb VERTICAL MACHINING CENTER, MANUFACTURED IN 2015 EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL TRAVEL: X 500, Y 400, Z 330 MM TABLE SURFACE: 550 x 380 MM DIRECT DRIVE SPINDLE, 24,000 RPM SPINDLE COOLANT SYSTEM Bljdpfxsy Tvnwj Acnel

Condition: used, Year of construction: 1974, x-travel 9700 mm y-travel 3500 mm z-travel 640 mm w-axis 3000 mm Control Siemens Blsdpfxeyq Sxle Acnol type 840D PL spindle diameter 200 mm Spindle capacity 85 Kw surface area 9000x2800 mm Table load 40000 kg column daylight 3400 mm high speed spindle taper ISO 50 weight of the machine ca. 193,8 t dimensions of the machine ca. 22,4x10,2x8,2 m Retrofit 2009 Steep taper ISO 60 DIN 2079 Speed ??12-450 rpm Milling heads: 1x WF 680/450 1x WFU 180/350 1x WFU 70/300 1x 550 mm extension for WFKs The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Bedpfx Acjxh Rqtenell Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, FANUC ROBODRILL ALPHA T21 i FIa is a Vertical machining center delivering precision, high accuracy and reliable performance. Working capacities: table 850 x 400 mm, table load max 300 kg, travels X700 mm, Y400 mm, Z330 mm, total 5 axes, spindle nose-to-table 250–580 mm, tool magazine 21 positions, max tool weight 23 kg. Main technical specs: stepless spindle 100–24,000 t/min, rapid traverse 54 m/min, spindle power 5.5 kW, supply 3x 400 V 50 Hz, total installed power 11 kVA; machine weight ~2200 kg; footprint L2140 x W2000 x H2350 mm. Achieves tight tolerances; suited for automotive, watchmaking, machine tool, aerospace and medical applications. Blsdjyxntvopfx Acnel